Dissertation > Excellent graduate degree dissertation topics show

Development of PMC High-speed Data Transmission Board Design Based on FPGA-RocketIO_X

Author: CaoJiHai
Tutor: ZhangNing
School: Harbin Institute of Technology
Course: Information and Communication Engineering
Keywords: data transmission RocketIO_X PMC Allegro FPGA
CLC: TP274.2
Type: Master's thesis
Year: 2008
Downloads: 140
Quote: 0
Read: Download Dissertation


With the rapid growth of information technology, the need of data transmission has already overstepped the Mole Law (the performance of bus will double the original capacity every three year). At present the PC provides many kinds of high speed bus interface between the boards, in which the PCI bus finds favor in the Computer industry not only because of its open local bus specification but also the its outstanding performance in high-speed transmission. At the same time, the rising high speed serial interlink technique becomes the mainstream of development for its success on eliminating the clock and data dithering these years. A series of high speed serial standards come out continually, too. The full duplex Gb/s serial transceiver RocketIO_X with the function of CDR (Clock Data Resume) from Xilinx make it possible that actualizing these specifications in long distance and high-speed data transmissions for the designer.This thesis focuses on the high-speed data transmission between RocketIO_X and based on the PMC bus interface. This paper first makes a further treatment on the argumentation about the PMC interface project. Then, the article concluded some basic rules of the stack-up design. Subsequently, the article designs the PCB of the data data transmission board by using the PCB design software Cacence Allegro and simulates the critical nets topology of the PCB by applying the software SigXplore. Moreover, the article gaves a particular description of design process of the PCI interface based on FPGA (Field Programmable Gate Array), including the development of the driver; the article validates the PCI interface design at last.

Related Dissertations

  1. Research on the Method of Electromagnetic Induction Data Tansmission in Downhole,TE928
  2. Research on Electromagnetic Acoustic Transducer Detection System Based on FPGA,TH878.2
  3. Study on Drive and Control System of Five-Phase PMSM Based on FPGA,TM341
  4. Development of LXI Arbitrary Waveform Generator,TM935
  5. Design of Digital Predistorter for RF Power Amplifier Based on FPGA,TN722.75
  6. Synchronization and Channel Estimation Algorithm in Bursted OFDM System and Its Implementation on FPGA,TN919.3
  7. Performance Analysis of Anti-Multipath Capability in DSSS System and Study on the Compensation Methods,TN914.42
  8. Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
  9. Research and Hardware Simulation of Multiuser Spread Spectrum Code Acquisition Based on FPGA,TN914.42
  10. Research on Basic Algorithms of Digital Image Processing and Implementation with FPGA,TP391.41
  11. Research of High Speed Image Pre-processing System Based on FPGA,TP391.41
  12. The Development of Soft System for Power Load Management Terminal Testing Device,TP311.52
  13. Design of High-Speed Digital Image Acquisition and Interface Based on FPGA,TP274.2
  14. Development of Inductance Sensor Data Acquisition System Based on FPGA,TP274.2
  15. Research on Data Acquisition and Transmission Technology in High Speed Digital Image Acquisition System,TP274.2
  16. Development of Serial Bus Analyzer Based on Nios,TP274
  17. Development of Pxibus High Performance Digital I/O Module,TP274
  18. Development of LXI Counter,TP274
  19. A High-Speed and Real-Time Data Acquisition System Based on FPGA,TP274.2
  20. Design of GPS Information Receiving System Based on Nios Ⅱ,TN967.1

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Data processing, data processing system > Data collection and processing systems
© 2012 www.DissertationTopic.Net  Mobile