Dissertation > Excellent graduate degree dissertation topics show

Application of the Wireless LAN in the Industrial Control

Author: WangQiChao
Tutor: BiShuE;YuAiMin
School: South China University of Technology
Course: Electronics and Communication Engineering
Keywords: boiler turbine wireless LAN wireless correspondence industry ether net PLC
CLC: TP273
Type: Master's thesis
Year: 2011
Downloads: 19
Quote: 0
Read: Download Dissertation

Abstract


In the industry automatic control system, if adopted the Ether network and field bus technology, it world come true system networking and improve system function and openness. However, these control networks are always based on wire network. High-speed and stable wire network can meet mostly industrial environment combined networks’need, but the wire network transmit data only along one-dimensional circuit by correspondence medium, which brings a series of work about transmission way such as layout wiring, interface fitting beforehand, circuit detection and circuit dilatation, these work could bring the problems of building breakage, wasting interfaces and difficult repair and expanding inevitably.In the wicked industrial environment, the wireless network transmit data to three-dimensional space doesn’t need transfer medium, if installs the interface equipment in the combined network, the LAN is established which supply the flexible network topology frame and high-strap wireless data link for communication between variedly field intelligent facilities、mobile robots and variedly automatic facilities. The mobile terminal installs wireless network card, which can connect the network freely in the receive range. Therefore, the wireless communication technology makes up the wire network’s shortage effectively in the special environment and perfects the industry automatic control network’s correspondence capability farther.This thesis elaborates the foundation techniques of wireless LAN and the wire industrial ether net technique. The wireless correspondence system model is established which suit for industry control by studying the key technique of wireless correspondence system such as transmission way、topology frame and network standard、confidentiality etc. This thesis elaborates carrying out method of this model and designs the wireless LAN correspondence system for a set of boiler turbine generate equipment according to this model.

Related Dissertations

  1. Development of Turbine Rotor Dynamic Balance System,TH877
  2. Aerodynamic Performance Analysis of Low Pressure Turbine at Low Reynolds Numbers,V231.3
  3. Influence of Inclined Secondary Air on Gas-Solid Flows in a W-Shaped Flame Boiler,TK229
  4. Influence of the Secondary Air Angle on the Airflow Field in a Down-Fired Boiler,TK229
  5. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  6. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  7. Grid-Side Converter Control and Wind Turbine Emulator in Direct Drive Wind Power System,TM46
  8. The Development of Electric Control System for Product Line of Cross-Linked Cable,TP273.5
  9. Research on Key Technologies of Automatic Steel Wire Galvanizing Production Line Based on Gas Reduction Method,TQ153.15
  10. Design and Study on Absorption Plant of Sulfur Dioxide from Flue Gases,X701.3
  11. Equipment Research of the Ship Sewage Treatment,X703
  12. The Roles of Phospholipase C and D in Xylanase-Induced Defense Responses in Suspension-Cultured Rice Cells,S511
  13. Medium Density Fiberboard Drying System and PLC Control System Design,TP273
  14. Gantry planer simulation equipment design,TG551.2
  15. The Simulation Technology Study of Marine Gas Turbine Based on Modular Modeling,U674.703
  16. Research on Microstructures and Properties of FeMnCrNiAlBSi/Cr3C2 Coatings,TG174.44
  17. The Design of Automatic Control System of Experimental Stereo Garage,U491.71
  18. Research on Control of Direct Driving Type WTG Grid Converter Based on DSP,TM46
  19. The Multi-Application and Implementation of Auxiliary Control Network in Power Plant Desulfurization Systems,TP311.52
  20. Analysis and Realization of Pipe Extrusion Line Control System,TP273

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system
© 2012 www.DissertationTopic.Net  Mobile