|
Construction works very closely with the people's production and life, the quality of the construction work is good or bad, not only the relationship between the people's life and property security, is also related to the image of the country and the nation. \The reinforced concrete structure due to its relatively low cost and suitable for high-rise buildings, useful to the development of China's construction work space. In China, reinforced concrete structure is a structured form of the most widely used, accounting for the vast majority of the total, the same time, China is also the world's largest reinforced concrete structure. Reinforced concrete structures construction part of our construction work is still at a preliminary stage, the construction quality is not satisfactory, engineering and frequent accidents. The main reason is unsound construction organization, management is not fine; lower the quality of the construction workers on the correct operation and control of unknown principle; engineering quality supervision and management system is not perfect. This paper summarizes the comprehensive quality control experience on the basis of reinforced concrete structures in the construction engineering quality problems, prevention and treatment measures done some research. First, this paper analyzes the status quo of Construction Engineering Quality Control cited the quality control of the construction phase of the project based on factors and quality control, and according to the the comprehensive whole process of quality management and dynamic control theory of the project's three-stage quality control mode, that is, pre-pre-control things in control and post-correction control. And analysis tasks and content of the various stages of quality control, some measures of the quality of the project to ensure the construction stage. Then, the paper highlights a greater impact on the quality of the reinforced concrete reinforced sub-project and concrete sub-project. Reinforced raw material quality requirements and construction should pay attention to the problem and acceptance requirements for steel works, mainly; concrete works, mainly the quality requirements of the raw materials of concrete and concrete configuration mixing, transportation, pouring, molding, curing , post quality check, and concrete construction in winter precautions, and focuses on the most common concrete cracks. Then this paper briefly describes the steel works and concrete works often appear some quality problems and the prevention and treatment measures, with some of the more typical engineering examples specifically addressed the prevention and treatment of engineering quality problems. Only in the pre-construction, construction organization design, construction process to strengthen each link construction management, identify problems and take timely countermeasures, supervision and quality control personnel to enhance the sense of responsibility, in order to reduce and eliminate some quality in the construction of reinforced concrete issues to ensure the quality of the project.
|