Dissertation > Excellent graduate degree dissertation topics show

Different materials and hoop structure and premolars resistance experimental study

Author: LiHong
Tutor: ZhangZuo
School: Qingdao University
Course: Clinical Stomatology
Keywords: ferrule design fiber post costing post fracture resistance
CLC: R783
Type: Master's thesis
Year: 2011
Downloads: 20
Quote: 0
Read: Download Dissertation

Abstract


objective To evaluate the fracture resistance of endodontically, this study was to evaluate the fracture resistance of endodontically treated mandibular premolars restored with glass fiber posts and casting post when different types of ferrule designs were incorporated.Methods eighty-eight mandibular premolars were divided into three groups:Group A is casting post,Group B is fiber post.Group C is not post. A, B group is divided into 5 groups, each with eight samples. Group 1:teeth with a 1mm circumferential ferrule; Group 2:teeth with a lmm ferrule only in the buccal region; Group 3:teeth with a 1mm ferrule only in the lingual region; Group 4:teeth with a 1mm ferrule in the buccal and lingual region; Group 5:teeth with no ferrule. A, B groups were used to casting post, fiber posts before restored with porcelain fused to metal crown. Group C(control):teeth with root canal treatments having a full crown prosthesis.All experimental teeth were subjected to an increasing compressive force with a crosshead speed of 1mm/min, until fracture occurred.Results (1)Group A:The loading force value in first group is 1383.3±187.6N, which is significantly higher than 1067.6±234.3N in the control group (p<0.01); The loading force value in first group is 1067.6±234.30N, which is significantly higher than 668.9±230.90N in the sixth group (p<0.05). The difference in remaining groups were not statistically significant.(2)Group B:The fifth group of the loading force value (668.9±230.90N) than the control group, there is significant difference (p<0.05). The difference in remaining groups were not statistically significant.(3) The comparison values of loading force between different post and core with the same ferrule structure shows that Al (1383.3±187.6N) and B1 (837.5±228.0N) there are differences (p=0.001), no difference between other groups.(4) The comparison of fracture mode between different post and core with the same ferrule structure shows that A2 and B2 (p=0.026), A3 and B3 (p=0.007), A5 and B5 (p=0.001) were significant differences. No difference between other groups.Conclusion It was concluded different ferrule designs did not have any influence on the fracture resistance of mandibular premolars with fiber posts. And when the remaining tooth structure is less, the fracture mode for the repair-type. Therefore, Fiber post and core can be used for a variety of mandibular premolars, with a wide range of prospects.

Related Dissertations

  1. The Effect of Different Root Canal Internal Surface Treatment on Bond Strength of Quartz Fiber Post,R783
  2. Test and Study on Anti-fracture Ability of Reinforced Filling Body in Dental Disease,R783
  3. Effects of Different Amount of Residual Tooth on the Anti-fracture Property under Lateral Loading in Fiber Post-core System,R783
  4. Studies on Controlled Air Hole Collapse in Photonic Crystal Fiber,TN253
  5. Effects of Radicular Dentin Treatments and Luting Materials on the Bond of Quartz Fiber Posts in Vitro,R783
  6. Study of Microleakage and Fracture Resistance of Weakende Root Rehabilitated with Resin Composite,R783
  7. The Fracture Behavior of Premolar Teeth with Class Ⅱ Cavities Restored by Polyethylene Fiber,R783
  8. Effect of Different Silanization on the Shear Bond Strength of Fiber Posts in Vitro,R783
  9. Study of the Relativity between Thedifferent Thickness of Residual Tooth and the Timing of Post-Core Application,R783.3
  10. Clinical Observation of Fiber Post in Restoration of Residual Root and Crown,R783
  11. Effects of Surface Treatments on Bond Strength of Fiberposts and the Fracture Resistance of Teeth,R783
  12. An in Vitro Study on Mechanical Properties and Structural Characteristics of Six Types of Posts,R783.3
  13. Fracture Strength of Maxillary Incisors after Restoring by Different Post-Core Material and Ferrules Systems,R783.1
  14. Comparing the Fatigue Resistances of Two Type of Post-and-core Systems,R783
  15. The Effects of Different Surface Treatments on the Adhesive Strength between POPO Fiber Post and Resin Cement,R783
  16. Different adhesive systems interface with fiber pile tract morphology and bond strength analysis,R783
  17. Two piles of nuclear and clinical application of the front teeth defects repair,R783
  18. The Effect on Retention of Glassfiber-reiforced Composites Post of Pre-treatment on Root Canal Wall,R783.3
  19. Effects of Two Canal Sealers on the Shear Bond Strength of Fiber Posts Cemented Using Different Adhesive Approaches: Push-out Test and SEM Study,R781.05
  20. The Influence of the Root Canal Internal Surface Treatment to Bond Strength of Fiber Post to Root Canal,R783.3
  21. The Study of the Fracture Resistance of Teeth Restored with Fiber Post and Metal Post,R783

CLC: > Medicine, health > Oral Sciences > Oral orthotics
© 2012 www.DissertationTopic.Net  Mobile