Dissertation > Excellent graduate degree dissertation topics show

Research on the Metal Erosion-corrosion Base on a Failure Analysis about the Elbow

Author: ZhangJian
Tutor: JiangXiaoDong
School: East China University of Science and Technology
Course: Safety Technology and Engineering
Keywords: Heat exchange Failure analysis Action oxidation High temperature corrosion HCl Wear map
CLC: TG172
Type: Master's thesis
Year: 2012
Downloads: 83
Quote: 0
Read: Download Dissertation

Abstract


This paper is based on a failure analysis about an elbow of one coil heat exchanger, by the conventional failure analysis, the failure reasons that are related to the stress corrosion cracking and erosion-corrosion are obtained finally. The existed theories cannot explain this phenomenon clearly. To match the reality better, the CFD software are used to simulate the effect upon the corrosion that the temperature and pressure have on the heat exchange tube. Combined the simulate result and the actual situation of the equipment with the action oxidation theory ,a failure analysis is made. According to the action oxidation theory, the reason why the broken only happen at one special location and the reason why the stress corrosion crack appears can be explained. Drew the wear map though the corrosion date (Based on the corrosion data, a wear map is drawn) and the validity of the wear map is verified by the corrosion date from the other equipment. At last, provide the suggestions on the material selection, equipment design and equipment life prediction.

Related Dissertations

  1. Failure Analysis on Superheat Section Connecting Pipe Flange of Ethylene Cracking Furnace,TQ221.211
  2. Mine Hoist Based on Expert System Braking System Remote Monitoring and Diagnosis System,TD534.5
  3. Failure Analysis and Structural Optimization of the Typical Fine Blanking Punch,TG385.2
  4. Al Wire Bonding Failure and Automatic Optical Inspection on Power Device Leadframe,TG441
  5. Study on Ultrasonic Testing Technology for Motor Bolt in Service,TM31
  6. Research on Design of DP Thruster System of Wind Farm Installation Vessel,U664.3
  7. An Integrated Model for C-e Government Website Translation,H315.9
  8. The production-proven 45nm NOR Flash,TP333
  9. Advanced EFA electrical failure analysis the positioning technology PFA physical verification technology research,TN407
  10. TSV interconnect technology Reliability,TN405
  11. Structure Design and Characterization of Novel Rapid Response Clay/Poly (N-isopropylacrylamide) Nanocomposite Hydrogels,TB383.1
  12. Research on the DF8002 Dispatching Automation System and Countermeasures of Its Common Faults,TM734
  13. The Secondary Development and Upgrading Research of Heat-exchange Equipment CAD System for Thermodynamic System,TK172
  14. Analysis on Hull Girder Ultimate Strength and Residual Strength of Damaged Ship by CSR,U661.43
  15. The Application of Failure Analysis for DRAM Product,TN407
  16. Failure Analysis Application in Advanced Semiconductor Process,TN405
  17. The Study and Design of Descaling Circulatory System of FeCl3-HCl,TG155.42
  18. Structural stress analysis of laminated composite plate with a hole,TB33
  19. Research on Fixed Value Setting and Design on Management System of Relay Protection for Power Plan,TM774
  20. Large rolling synchronous motor damper bar Failure Analysis and Countermeasures,TM341
  21. Design and Implementation of the Kitty Hawk the -500 aircraft landing gear fault diagnosis system,V226

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metal corrosion protection,metal surface treatment > Various types of metal corrosion
© 2012 www.DissertationTopic.Net  Mobile