Dissertation > Excellent graduate degree dissertation topics show

Study of Buckling in Continuous Annealing Process Line and the Improvements

Author: LiangJunJie
Tutor: LuJiDong
School: Huazhong University of Science and Technology
Course: Thermal Power Engineering
Keywords: Continuous annealing line Cold-rolled plant Buckling Process control
CLC: TG156.2
Type: Master's thesis
Year: 2011
Downloads: 98
Quote: 0
Read: Download Dissertation

Abstract


The problem of buckling related to wide steel strip in continuous annealing process line is studied in this thesis. The structure of the continuous annealing furnace and the key control technical are introduced, and the annealing process for steel strip in the furnace is analyzed. The cold rolling conditions and annealing process are closely involved to the generation of buckling problem. Both the high-temperature and the low-temperature sections in the furnace are likely to produce buckling defect. The impacts of strip buckling such as: strip properties, furnace roll, temperature and tension parameters are analyzed.Heat transfer process of the steel strip in continuous annealing furnace is analyzed to study the influence of heating and cooling conditions on the strip surface quality. The forces exerted on the strip in the real annealing process line are calculated: Strip suffers large bending stress when it is rotated around the roller; the fluctuation of the furnace temperature leads to a greater thermal stress on the strip surface.According to the actual production process, some corresponding buckling control measures are proposed: Take regular inspection and maintenance of roller, replace the furnace roller which is badly worn in time to ensure a uniform distribution of forces when the strip runs around the furnace roller and also to prevent the strip snaking in the furnace; Use low-temperature annealing process to reduce the furnace temperature level to improve the anti-buckling capacity of the strip; Adopt the transverse uniform cooling technology, so the cooling air flow could be distributed reasonably. Make sure the strip is cooled uniformly to prevent the impact of thermal stress on buckling. The optimal scheduling strategy can be used to ensure the acceptable change of the strip scale, and stable production of the strip.The result shows that the wide strip buckling defect can be significantly reduced by applying the above measures.

Related Dissertations

  1. Stress folds regularity and the realization of a large area of ??ordered structures,TB383.1
  2. Study of Research on Synthetic Test Rig for Coal Mine Hydraulic Support Operating Valve,TD355.4
  3. Bridge Swivel Construction and Stability Analyses of Beijing Olympic Games,U445.4
  4. Research and Application on the Software Process Measurement Based on Statistical Process Control,TP311.52
  5. Copper spin necking punch forming numerical modeling and simulation,TG386
  6. Research and Design of One Kind of Paper’s QCS That Based on Embedded System,TP368.1
  7. Study of Analysis Model of the Internal Quality Defect for the Continuous Casting Billet Based on Standard Analysis,TG245
  8. The Control of Power Plant Main Temperature,TM621.4
  9. Research on Strip Wrinkling During Continuous Annealing Process,TG161
  10. Research on Consteel EAF Automatic Control System,TF345
  11. Development and Application of Dynamic Soft Reduction Process Control System for Bloom Continuous Casting Machine,TF341.6
  12. Project Management Applying for Beginning Rollperiod Maintain Time Optimized in Baosteel 2050 Hot Rolling Mill,F426.31
  13. The Software Design and Implementation of Production Process Control System,TP311.52
  14. Rolling Process Control and Models’ Study and Application for Rough Stands of Hot Strip Mill,TG335.11
  15. Large span beam bridge construction key process quality control study,U445.1
  16. Design and Realization of Aluminium Triethyl Produce Qeuipment Control System Based on CAN Bus,TP273.5
  17. The Research and Development on the Temperature Controller in Adhesive Production Process,TP273
  18. Surrounding the process control management of secondary vocational school students study,G718.3
  19. Criminal proceedings preliminary analysis of structure,D925.2
  20. Process Control of Rule of Law of Secret Investgation,D925.2
  21. Buckling Strength and Fatigue Strength Research Based on Common Structural Rules for Double Hull Oil Tankers,U661.43

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Heat treatment > Heat treatment process > Annealing
© 2012 www.DissertationTopic.Net  Mobile