Dissertation > Excellent graduate degree dissertation topics show

The Study of Control Strategy for High Pressure Common Rail Diesel Engine-Analysis on Strategy of Engine Position Timing

Author: LiPeng
Tutor: WuKeGang
School: Chang'an University
Course: Vehicle Operation Engineering
Keywords: diesel engine high pressure common rail electronic control system timing control strategy
CLC: TK423
Type: Master's thesis
Year: 2010
Downloads: 200
Quote: 1
Read: Download Dissertation

Abstract


With the energy sources and environment problem becomes increasingly prominent, the realization of energy saving and exhaust reducing has important significance. The using of high pressure common rail injection system becomes more and more applicable for it has the extrude advantage in the field of economy, power performance and reducing noise of diesel engine. The main characteristics of high pressure common rail injection system are list as follows:the injection pressure is flexible adjustable, injection timing can be controlled autocephaly agility, injection amount of oil can be adjustable freely and the injection rate figure can be controlled flexible. Based on these advantages, the high pressure common rail injection system was considering being the most efficiency and economic means to resolve the environment protection and energy saving double pressure. The research of electronic control system of diesel engine has important significance in improving of technology progress and independent study ability of our country.This thesis based on the scientific research "development of energy saving and high efficient gas engine for new type saloon car". After widely consult of home and abroad correlation literature, the control soft and strategy of high pressure common rail injection system were researched. The layered modularized method was adopted to design the control soft. Static structure of soft contains application layer, equipment layer and core layer. Dynamic process of soft adopts front ground and back ground structure, including main program and interrupt service program. The main programs complete the system initialization at first, then it carry through the collectivity prepare process and it was belong to the back ground of the soft. The interrupt service program deal with asynchronism affairs and it carry out the main test, monitor and timing synchronization and other tests. By analyzing the system structure and control theory of high pressure common rail injection system and carrying out the research of control strategy, the control strategy of camshaft sensor and crankshaft sensor were designed based on oil injection timing for signals from this sensors were important for the running of ECU. The engine bench test result shows that the control program of ECU can realize the start of engine smoothly; in the idling condition, the rotate speed of engine fluctuated in the normal field; the injection pulse width and time was match with the set value; the control strategy and soft design has a good real application effect.

Related Dissertations

  1. High Pressure Common Rail Diesel Engine Fueled with Biodiesel test under different atmospheric pressure,TE667
  2. Applied Research of Emulsified Fuel on S195 Diesel Engine,TE626.24
  3. A New 185K Single-cylinder Diesel Engine Supercharged System Development,TK423
  4. Research and Analyze of Diesel Engine Noise Quality for Motor Vehicle,U464.172
  5. The Design for Digital Governor Control System of Scm Based Diesel Engine,U463.6
  6. Study of Miller Cycle and Two Stage Regulated Turbocharging Ssytem on Marine Diesel,U664.121
  7. Simulative Investigation on the Exhanst Gas Reedrculation System of Turbocharged and Intercooled Diesel Enginet,TK421.5
  8. Studies on the Performance and Mechanism of the Novel Catalysts Loaded with Manganese and Iron for Low Temperatrue NH3 -SCR,TK421.5
  9. Simulaiton Study for Cold Starting Operation of Dieselengine with Exhaust Gas Recirculation,TK422
  10. Development of Electronic Rotating EGR Control Valve and Research of Its Control System,TK421.5
  11. The Research and Development of Hydrogen Engine Electronic Control System Hardware Based on MC9S12XS128,U464
  12. Improve the Mechanics Performance of the High Strength Grey Cast Iron,TG251
  13. Different atmospheric pressure turbocharged and intercooled diesel engine fueled with biodiesel research work process,TE667
  14. Get off the plateau environment with diesel engine fueled with biodiesel,TE667
  15. Design on the Structure and Control System of Ultra-small Batch-type Glass Fused Frunace,TQ171.6
  16. High - pressure common rail diesel engine management system, transmission coordination strategy,TK423
  17. Experimental study of oxygen-enriched air intake combined with EGR technology for turbocharged diesel engine emissions,TK421.5
  18. Based on multi-body dynamics of the diesel engine body structure strength analysis,TK421
  19. Stability test and the engine performance of the mixed fuel of ethanol, diesel and BED,TK428.9
  20. Flow simulation based on network analysis of diesel engine lubrication system,TK423
  21. High Pressure Common Rail Diesel Engine Calibration of the system communication module based driver development,TK423

CLC: > Industrial Technology > Energy and Power Engineering > Internal combustion engine > Diesel engine > Structure
© 2012 www.DissertationTopic.Net  Mobile