Dissertation > Excellent graduate degree dissertation topics show

LiFePO4/C Composite Cathode Materials Synthesis Process Research

Author: HuangXinHu
Tutor: XuYunLong
School: East China University of Science and Technology
Course: Materials Science and Engineering
Keywords: LiFePO4 microwave synthesis process electrochemical
CLC: TM912.9
Type: Master's thesis
Year: 2012
Downloads: 75
Quote: 0
Read: Download Dissertation

Abstract


LiFePO4/C composite materials is considered to be one of the most potential cathode materials for lithium-ion, there are many synthesis methods, however, LiFePO4 precursor prepared by microwave drying method is reported rarely. In this paper, LiFePO4 precursor was prepared by microwave drying method, and through high temperature sintering synthesized the LiFePO4/C cathode material, the preparation process was optimized, and researched the scale-up experiment. The samples were analyzed and characterized by TG-DSC, FTIR, XRD, SEM, TEM, CV and constant current charge-discharge experiments, the results showed that:(1) LiFePO4 precursor was prepared by microwave drying method with high efficiency, the preparation time is only about one-fifth of the rotary evaporation method, and the composite material has good electrochemical properties, its initial discharge capacities under 0.1C and 1C rates were 165.7mAh/g and 147.3mAh/g.(2) With the reduction in the amount of added citric acid, the precursor preparation time and volume expansion also reduced, but the discharge capacity of the synthetic material was decreased; The LiFePO4/C composite material synthesized with n(CA):n(Fe)=0.2:1 had the best comprehensive properties:Initial discharge capacities were up to 159.8mAh/g and 142.5mAh/g at 0.1C and 1C; Cycle stability was excellent, only 3.7% capacity fading after 100 discharge-charge circles at 1C.(3) The particle morphology and electrochemical properties of LiFePO4/C composite material synthesized by the scale-up experiment were relatively close with the small test sample, and its initial discharge capacities under 0.1C and 1C rates were 160.6mAh/g and 139.1mAh/g.

Related Dissertations

  1. Process Optimization and Degradation Kinetics for Microwave Vacuum Drying of Different Traditional Chinese Medicine Extract,TQ461
  2. ( Hydroxy) Iron Oxide and the removal of arsenic in drinking water,O614.811
  3. Synthesis and Seperation of 1,1’-binaphthol,O625.3
  4. Study of Microwave Assisted Incineration of Asphalt Flue Gas,X701
  5. The Preparation and Electrochemical Tests of Carbon Foam,O613.71
  6. Situ synthesis of mullite stone whisker toughening microwave metallurgical corundum - mullite Refractories,TQ175.6
  7. Experiments on Microwave Radiation Activation YunNan Unburned Coal-gangue Concrete,TU528
  8. The Study of Anode Catalyst Pd/C for Direct Formic Acid Fuel Cell,O643.36
  9. LSGM electrolyte thin films and electrochemical properties of,TM911.4
  10. Curing Mechanism and Properties of Fluorenyl Epoxy Resin,TQ323.5
  11. Study on Drying Processing and Sterilization on Spinach,TS255.52
  12. Preparation of Essence and Residues Powder from Flammulina Velutipes and Evaluation of Their Physical-Chemical Properties,S646.15
  13. Research of Electrochemical Immunosensor for Schistosomiasis Japonicum Diagnosis,R532.21
  14. Effect of Microwave on GAP-43 Expression in the Spinal Cord after Sciatic Nerve Lesions in Rats,R651.3
  15. The Impact That Microwave Acted on the Function Recovery of Peripheral Nerve Injured Experimental Rat,R651.3
  16. Spectra and Electrochemical Behavior with Analytical Application of Three Herocyclic Bis-Schiff Bases,O626
  17. Physical Modification of the Soybean Protein Concentrate by Alcohol Extraction,TS201.21
  18. Optimization of Extraction of Gastrodin from Rhizoma Gastrodia by Response Surface Methodology,R284.1
  19. Study on the Synthesis of New Containing Pyrazole Ring Aminophosphonate and 1,4-DPHs Derivatives,O626
  20. Electrochemical Studies on Interaction between ApoCopC、BSA and Cu(Ⅱ)、Cu(Ⅰ)、Cd(Ⅱ)、Ag(Ⅰ),O646
  21. Research on Electrochemical Synthesis and Application of Conductive Polyaniline,O633.21

CLC: > Industrial Technology > Electrotechnical > Independent power supply technology (direct power) > Battery > A variety of materials, battery
© 2012 www.DissertationTopic.Net  Mobile