Dissertation > Excellent graduate degree dissertation topics show

Research and Modification of Lightning Protection Measure for Secondary Equipment in Center Building of Electric Power Corporation in Yuan Ling

Author: XiongJunFeng
Tutor: ChenJunWu
School: Huazhong University of Science and Technology
Course: Electrical Engineering
Keywords: surge protection secondary equipment electromagnetic PSCAD simulation
CLC: TM862
Type: Master's thesis
Year: 2011
Downloads: 38
Quote: 0
Read: Download Dissertation

Abstract


Lightning surge is one of the main causes of electrical equipment failures. In recent years, more and more equipment have been struck by the lightning. Compared to the previous lightning characteristics, current characteristics and the form of lightning show differently. A significant feature is that the low-voltage systems have been frequently struck by the lightning, which lead to people’s lives and production suffered more and more losses. Nowadays, large amounts of researches about lightning surge have done in the country and abroad, but the specific research of lightning protection of secondary equipment is relatively small. Most researches focus on electromagnetic compatibility and algorithms of electromagnetic environment, but comprehensive lighting protection measures for the secondary equipment have not been paid enough attention.This paper summarizes the results on the basis of existing researches in the country and abroad. Firstly, several forms of lightning and the lightning surge intrusion are introduced, and mechanism of secondary equipment failure is analyzed in several ways. Secondly, based on the actual conditions of lightning damage to the secondary equipment in the building of Yuanling electrical power, a comprehensive lightning protection mode of secondary equipment is introduced by using distribution of current and voltage, equipotential bonding, grounding and shielding and other measures. This paper analyzes the impact of surge protection factors with the waveform, amplitude of current source, line parameters and load, and conducted two levels of surge protection by using PSCAD modeling and simulation, which lead to a conclusion that while the good using of the equipotential bonding and shielding can reduce the requirements of the grounding resistance.Two levels of surge protection and related mechanism of influencing factors are obtained by theoretical study and analysis of simulation result. While installing surge protectors at different places, different emphases should be considered to be the appropriate choice of economic devices. Lightning protection should be adapted to local conditions. Only in this way, can lightning protection of secondary equipment be safe and efficient.

Related Dissertations

  1. Research on the Method of Electromagnetic Induction Data Tansmission in Downhole,TE928
  2. The Technological Parameter Analysis and Influencing Factor Research on RUV4 Automobile Ignition Coils,U463.64
  3. Passivity-Based Control and Its Application to the Electromagnetic Levitation System,TP13
  4. Simulation on the Principle of Field Shaper in Electromagnetic Sheet Metal Forming and Construction Improvement,TG661
  5. Electromagnetic Compliance Design in Multifunction Radio Digital Communication Terminal,TN03
  6. Underwater non-contact power transmission device design , testing and research,TM724
  7. Electromagnetic environment based on embedded Linux Simulator Design and Implementation,TN955
  8. The airborne radar RCS algorithm with the software implementation,TN959.73
  9. Research of the Lightning Protective Gap in 110kV Transmission Lines of Oil Field,TM863
  10. Study on Power Supply of On-line Monitoring Equipment for High Voltage Equipmen,TM726.3
  11. Study on Prediction and Prevention of Burst in High Stress Area of Deep Mining,TD324
  12. Longjiapu mine burst control technology research,TD324
  13. The Modeling and Simulation Research of FACTS,TM743
  14. Electromagnetic Impacter Electromagnetic Analysis and Simulation,TM154
  15. The Research of Optimization Design and Parametric Drawing of Amorphous Alloy Transformer,TM402
  16. The Preparation and Characterization of Conducting Polymers with Electromagnetic Function,TB383.1
  17. Research on the Precise Blank Forming Worm Wheel of the High Aluminium Zinc Based ZA27 Alloy by the Liquid Forging and Semi-Solid Forging Technology,TG316
  18. Technology for Semi-Solid of ZL101 Aluminum Alloy During Inclined Plate Cooling Under Alternating Electromagnetic Field,TG146.21
  19. The Power Line Communication that Effectting the Radio Communication, and the Radio Management of that,TM73
  20. Generalized electromagnetic field effects on the elastic structure of elastic wave propagation,O343
  21. Effects of the Coating on the Properties of Electro-Magneto-Elastic Composites,O343.7

CLC: > Industrial Technology > Electrotechnical > High Voltage Engineering > Overvoltage and Its Protection > Over-voltage protection devices
© 2012 www.DissertationTopic.Net  Mobile