Dissertation > Excellent graduate degree dissertation topics show

Research on Recycling Technology of Key Parts in Post-use Air-conditioner

Author: HuangJiaoHong
Tutor: LiuZhiFeng
School: Hefei University of Technology
Course: Mechanical and Electronic Engineering
Keywords: Air-conditioner Recycle Refrigerant Compressor Heat-exchanger Printed circuit board(PCB)
CLC: X705
Type: Master's thesis
Year: 2010
Downloads: 146
Quote: 1
Read: Download Dissertation

Abstract


With the rapid development of science and technology,the renewing speed of house-hold appliances is accelerating constantly,and more and more house-hold air-conditioners come into the stage of life-ending. There are many valuable materials in post-use air-conditioners,which can be recycled and reused to save resources,to protect environment and to develop circulative economy.Through the researching on dismantling methods, dismantling sorts and dismantling principles of post-use air-conditioners,on the base of analyzing the recycling and treating technologies at home and abroad,using split air-conditioners as examples,the recycling process of wasted and old air-conditioners is put forward in the paper which adapts to Chinese condition. The harm of discharging refrigerants freely is indicated and the actualities of recycling refrigerants at home and abroad are analyzed. By improving the existing refrigerant recycling systems,a new type of refrigerant recycling equipment is designed and a special recycling tool (pipe connector under pressure)for refrigerants is developed. The actualities of recycling compressors in post-use air-conditioners are analyzed and the feasible technologies for recycling compressors are established. Both the case-opening technique of compressors and the separating method of enamel-insulated coils and iron-cores in compressor motors are studied in detail,and the respective equipment is designed. The sort and structure of air-conditioner heat-exchangers are analyzed in the paper. The mechanical and physical method for heat-exchanger’s batch recycling is presented for the first time,which includes pre-treating,cutting,crushing,rolling,smashing,vibrating and air blowing. Finally,the recycling process of printed circuit boards in post-use air-conditioners is put forward,which includes the unsoldering of components,the crushing of PCB boards,the smashing of PCB pieces and the separating of PCB grains.The recycling process for post-use air-conditioners drawn in the paper and the technologies and equipments designed for recycling key parts in air-conditioners are of great significance in instructing enterprises to recycle post-use air-conditioners and other electronic and electrical products.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  3. Zinc kiln residue of dry exhaust gas emission reduction and waste heat recycling research,X756
  4. Research of Resource and Recycling on Pig Excretion in Wenzhou,X713
  5. Engineering Design on the Treatment and Reuse of Coal Mine Drainage,X752
  6. Study on the Performance of Mixing in the Jep Loop Reactor,TQ052
  7. Optimizing the GZSZ’s Operation Manage of the Recycled Asphalt Concrete Produced,F426.92
  8. Study on Hydrogenation and Characterization of Recycle Solvent for High Inertinite Shenhua Direct Coal Liquefaction,TQ529.1
  9. Study of Optimal Control Strategies for Hybrid Ground-Source Heat Pump System in Wuhan,TU831.3
  10. The Recycle Dyeing with Dip Dyeing Effluent of High-Temperature Reactive Dye on Cotton Yarn for Dark Colour,TS193.6
  11. Study on Thermal Calculation in Boilers with O2/CO2 Recycle Combustion,TK222
  12. Experimental Research and Energy-Saving Analysis of a Ground Source Heat Pupm System in Tangshan,TU831.3
  13. Numerical Simulation Analysis of the Three-Points Welding for Air-Conditioning Compressor,TG44
  14. A Study on Cost Management of Scrap Industry,F426.31
  15. Tube heat exchanger thermal and stress analysis,TQ051.5
  16. The Research on Waste Particleboard Panel Furniture Recycling Technology,TS653
  17. Optimal Design for Plate Heat Exchanger by Particle Swarm Optimization Based on MATLAB,TQ051.5
  18. Study on System of Energy-saving Fluidized Bed Drying with Immerged Heat Exchanger Applied to Glauber’s Salt Industry,TQ131.12
  19. Simulation Analysis on a Direct Expansion Solar Assisted Heat Pump Water Heater,TK513
  20. Research on PCB Netlist Extraction Based on CBCT Images,TN41
  21. Numerical Simulation and Scale-Up Study on the Particle Distribution of Liquid-Solid Fluidized Bed Heat Exchanger,TK124

CLC: > Environmental science, safety science > Processing and comprehensive utilization of waste > General issues > Solid waste disposal and utilization
© 2012 www.DissertationTopic.Net  Mobile