Dissertation > Excellent graduate degree dissertation topics show

Coagulant Dosing Process Control Technology

Author: LiPeiJun
Tutor: TanGuangYi
School: West China University
Course: Fluid Machinery and Engineering
Keywords: Coagulation Coagulant dosing Numerical model Neural network BP network Simulation
CLC: TU991.22
Type: Master's thesis
Year: 2010
Downloads: 62
Quote: 0
Read: Download Dissertation

Abstract


Coagulation is an economic and simple water treatment technology in improving the water quality treatment efficiency at home and abroad. Coagulation is one of the key issues of dosage control. Accurate dosage of coagulant is the prerequisite of obtaining good coagulation effect and economic benefits. Many domestic water plant coagulant dosage results are not satisfactory, because in actual treatment process, due to the fluctuation in water quality and quantity, how to control changes in water quality for the best coagulant dosage, has long been the water supply industry general concern but a serious problem.In the actual treatment process, The dosing process of coagulant has the characteristics of non-linear, long time delay, multi-variable, etc. Therefore, the research of control method for the dosing of coagulant has great significance.Through analyzing the factors of coagulation and the factors affecting the coagulation process, the factors affecting the coagulation dosage are found out. Main factors, like temperature, quantity of raw water and turbidity of raw water are found out through analyzing the actual situations. Through treatment of temperature zone and raw water quantity, the turbidity of raw water is viewed as the only factor which will affect the dosage, and numerical model of raw water turbidity and dosage amount is established. Through comparing the actual data, we found out that the established numerical model is effective. However, its precision is not too very high due to the special conditions while the establishment of this model. With the development of neural network, the BP neural network is applied in the control of coagulant dosage to realize precise control of the dosage. According to the simulation of actual data, a good effect is obtained. Thus the accurate control of coagulant dosage is realized and the production cost is reduced.An automatic control method suitable for the coagulant dosing in waterworks is developed through studying the control method of coagulant dosage. This method is very suitable for the current automatic level of medium- and small-sized waterworks of China and has wide application prospects. .

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  3. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  4. Study on Springback of High-Strength Steel Stamping,TG386
  5. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  6. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  7. The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
  8. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  9. Satellite Attitude Determination Based on Gyro and Star Sensor,V448.2
  10. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  11. Research on Orbital Control Method for Space Rendezvous and Docking,V526
  12. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  13. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  14. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  15. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  16. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  17. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  18. Numerical Simulation of Biomass Direct Reburning,TK16
  19. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  20. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  21. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173

CLC: > Industrial Technology > Building Science > Municipal Engineering > Water supply project ( on the Water Works ) > Clean Water ( water treatment ) > Coagulation
© 2012 www.DissertationTopic.Net  Mobile