Dissertation > Excellent graduate degree dissertation topics show

Discrete Element Analysis on the Waterproof Pillar to Coal Seam Mining Goaf Beside Large Fault

Author: WangYao
Tutor: GeXiaoGuang
School: Hefei University of Technology
Course: Geological Engineering
Keywords: Discrete Element Method (DEM) Fault water-proof pillar mining-induced fracture
CLC: TD32
Type: Master's thesis
Year: 2010
Downloads: 209
Quote: 1
Read: Download Dissertation

Abstract


Not only the theoretical basis of Discrete Element Method (DEM) but also the classification and characteristics of DEM were discussed. For coal mining in the mined-out area surrounding rock caving, cracking, deformation phenomena, UDEC4.0 software was used in the numerical calculation to the distribution of displacements and stresses surrouding mining goaves of seam 10# and seam 81 about fault F2 in Taoyuan Coal Mine, and proper width of waterproof pillar to the fault. Main contents are:①Water-bearing and water-resisting features of Coal-bearing beds and related strata were analyzed. Evaluation and analysis about the material composition and physics mechanics of the fault F2 were analyzed.②Order formula was used to calculate the width of waterproof pillar of seams 10# coal and 81# corresponding to different safety factor. Based on Tectonic model of DEM about Mohr-Coulumb Constitutive continuous medium and Joint area contact-coulomb slip with residual strength joints media, referring to Taoyuan Coal Mine Stratigraphy and fault F2, a variety of coal pillars of seam 10# and seam 81# under the conditions of deformation and failure characteristics of rocks were simulated, and non-linear relationship between the fault waterproof pillar width and thickness of the seams was researched, and the reasonable value of coal pillar width about seam 10# and seam 81# is also tried.③By a in-depth analysis to practical deficiencies of fault waterproof pillar formula in the professional regulation, the mechanics meaning and application characteristics of the formula, the irrationality of a linear relationship between seam thickness and pillar width, as well as the contradiction between that and the actual laws of fractured, were pointed out lacement angle theory was led to analyze the applicable conditions and defects of the design calculation on water-proof pillar to faults.

Related Dissertations

  1. Research on the Electromagnet Lock of Earth Fault Protection for 10kV Switchgear,TM591
  2. Development of Fault Diagnosis System for Turbine Shaft Based on Neural Network,TK267
  3. Study on the Application of Energy Storage System to Enhance the Stabilization of Grid-connected Wind Farm,TM614
  4. A Study on Fault Diagnosis and Location of Partial Discharge Fault of Oil-immersed Transformer,TM407
  5. Software Simulation Platform and Fault Diagnosis Method for an Underwater Equipment System,U676.42
  6. A Study on the Regulation of Network Commercial Libel Act-Focusing on the Perspective of Unfair Competitive Law,D922.294
  7. The Fault Diagnosis of Wind Turbine Gearbox Based on LSSVM of Parameter Optimization and Improved PSO,TM315
  8. Research on Stability Control of Smart Grid & Fault Selection,TM712
  9. Research for Icing Monitoring of Power Transmission Line Based on Composite Insulator Inlined Optical Fiber Bragg Grating,TM755
  10. Uncertain Information Fusion Method Based on Random Sets and Application on Fault Diagnosis of Wind Turbine Generators,TM315
  11. Transmission Line Fault Location Analysis System Design and Implementation,TP311.52
  12. ALU-8521LS generator regulator fault detection system design and implementation,TM423
  13. The Research and Experimental Analysis of Electronic Control Diesel Engine’s Fault Simulation System,TK428
  14. Based on fuzzy logic inference car fault diagnosis system research and design,U472.9
  15. Call center failure receiving information and data processing systems design and implementation,TP311.52
  16. Simple system fault analysis software package developed,TM744
  17. Research on Automatic Test System of Inverter Air Conditioner Electrical Control Board,TM925.12
  18. Application of Information Fusion Technology of Improved D-S Evidence Theory in Fault Diagnosis of Rotating Equipments of Generating Units,TM307.1
  19. WEB-based remote monitoring system for electrical and mechanical equipment applied research,TP311.52
  20. Banking network monitoring and management system development and implementation,TP311.52
  21. Study on the Impact of Victim’s Fault on Sentencing in Intentional Injury Cases,D925.2

CLC: > Industrial Technology > Mining Engineering > Mine the pressure and support > Rock pressure and rock movement
© 2012 www.DissertationTopic.Net  Mobile