Dissertation > Excellent graduate degree dissertation topics show

Nonadiabatic tapered multimode fiber satisfied effect and its application in micro- mixer

Author: XuYingYing
Tutor: FuJian´╝ŤZhangLei
School: Zhejiang University
Course: Optical Engineering
Keywords: Tapered fiber satisfied Prosperous and potential field Multimode effects Microfluidic Micromixer
CLC: TN253
Type: Master's thesis
Year: 2011
Downloads: 97
Quote: 0
Read: Download Dissertation

Abstract


Related Dissertations

  1. Passive microfluidic channel mixer topology optimization,TH703
  2. A Microfluidic Chip for Cell-based Assays,TN492
  3. Novel cyclic olefin copolymer microfluidic chip fabrication and chip electrophoresis with amperometric detection related technologies,O658.9
  4. Studies on the Application of Micro/Nanofluidic Chip in Medical and Biological Analysis,O658.9
  5. Direct PCR from Plasma on Chip and Establishment of a Microfluidic Chemiluminescence SNP Analytical System,R440
  6. PDMS Chip-Based Sequential Injection Analysis System with Integrated Pneumatic-activated Valves,O657.3
  7. Preparation of High Performance Lanthanide-Doped Fluorescent Nanocrystals by Microfluidic Reactors with Control of Nucleation and Growth Process,TB383.1
  8. Nano Patterned PDMS for Microfluidic Application,TB383.1
  9. Ultrasonic Fusion Bonding for Polymer Microfluidic Chips,TN405
  10. Electrifying-electrodes Assisted Thermal Bonding Method and Fabrication of Multi-metal Microelectrodes Integrated on the Single Substrate,TN405
  11. Research on Fabrication of Polymer Microfluidic Chips with Complicated Microstructures,TN492
  12. Polymer microfluidic chip ultrasonic bonding method,TN405
  13. Study on the Phase Changing Valve in Microfluidic Chip,TN492
  14. Cause and Prediction of the Defects in the Process of Injection Molding for Micro-fluidic Chip,TQ320.66
  15. The Numerical Simulation of the Microfluidic System,TP211.4
  16. Finite Element Analysis of Ultrasonic Traveling Wave Micro-fluid Driving Annular and Cylinder Model,R318.0
  17. Study on Numerical Simulation and Optimization of Mixing Performance of Passive Micromixer at Low Reynolds Number,TH703
  18. The microfluidic chip injection molding process parameters optimization,TQ320.662
  19. Developed using the the miniaturization drive control system based on the SOPC technology microfluidic digitized,TP273
  20. Experimental study of the electromagnet actuator drive system microfluidic digitized,TP61

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Photonics technology,laser technology > Optical waveguide and integrated optics > Fiber optic components
© 2012 www.DissertationTopic.Net  Mobile