Dissertation > Excellent graduate degree dissertation topics show

Research on Dual PWM Coverter Technology for the VSCF Doubly Fed Wind Power Generation System

Author: WangShiTao
Tutor: ZhangHuiJuan
School: Hebei University of Technology
Course: Electrical Engineering
Keywords: VSCF DFIG vector control PWM converter wind power
CLC: TM46
Type: Master's thesis
Year: 2011
Downloads: 66
Quote: 1
Read: Download Dissertation

Abstract


With the increasing scarcity of the energy in the world, renewable energy has been attached great importance widely. As one kind of clean energy ,wind energy has great potential and has been developed rapidly. Wind power technology has become a research hotspot among scholars around the world. Focusing on variable speed constant frequency (VSCF) doubly fed wind power generation system dual PWM converter control technology ,the paper is written as follow.Firstly, basic principles of VSCF double-fed generator and dual PWM converter are studied, and Doubly Fed Induction Generator (DFIG) mathematical model basing on ABC three-phase stationary coordinate system is analyzed. Base on tne coordinate transformation principle, the DFIG mathematical model basing on d-q coordinate is derived, and the base topology and operating principle of dual PWM coveter is analyzed.it establish the theoretical foundation of creating the system simulation model.Moreover, according to the basic structure of PWM Grid Side Converter (GSC), a mathematical model has been established. The voltage oriented control scheme is utilized to meet the goal of GSC that it is controllable. And then the double close loop control provides the setting of PI controller utilizing the space vector pulse-width modulation. Finally, a demonstration of the control scheme has been shown by MATLAB/Simlink.In addition, a stator flux oriented control theory and DFIG mathematical model basing on d-q coordinate is employed to design the Rotor Side Converter control scheme. A discussion of double close loop adjustor contributes to both close and open loop of the PI setting using a u-w model stator flux monitor. Next, this process has been proved by MATLAB/Simlink.Lastly, based on the study of both GSC and RSC, both of two side is connected,the whole simulation of this system is built by MATLAB/Simlink. The results show the DFIG performs as the wind speed changing which is meet the requirement of GSC and RSC. Therefore, this is the condition of variable speed constant frequency and it proves the correctness of the system designed.

Related Dissertations

  1. Simulation Research on Compound-Structure Permanent-Magnet Synchronous Machine System Used in Hybrid Electric Vehicles,TM341
  2. Grid-Side Converter Control and Wind Turbine Emulator in Direct Drive Wind Power System,TM46
  3. Research on Vector Control System of Induction Motor Based on DSP,TM346
  4. Research on Induction Motor Vector Control System Adapting Multi-Bus Communication Mode,TM346
  5. The Research of Control System of Permanent Magnet Synchronous Motor Based on DSP,TM383.42
  6. Shandong Peninsula wind energy development strategy of leading low-carbon economy,F426.61
  7. Control System Design for Position Sensorless Permanent Magnet Synchronous Motor,TM341
  8. The Research of Wind Power Generation System Based on DFIG,TM614
  9. A Project about Intergrative Control System of Elevator Drive and Power Feedback,TP273
  10. Research of Speed Sensorless Vector Control System Based on Stator Flux-oriented,TP212
  11. Study of Dynamic Simulation Experimentation on Flexible Power Conditioner Based on Flywheel Energy Storage,TM761.1
  12. Research on Matrix Converter Fed Induction Motor Vector Control System,TM346
  13. Research of the Vector Control for Wound-Rotor Brushless Doubly-Fed Motor,TM346
  14. Design and Implementation on Drive Control System of Industrial Sewing Machine,TP273
  15. Design of Inverter Control System for Low Speed and High Torque Compound PMSM,TM341
  16. Research on the Vector Control System of PMSM Based on DSP,TM341
  17. High-Performance Ofyaw Controlsystem’s Research of Wind Power,TM315
  18. Study on FPGA Based Fuzzy PID-Vector-PWM Controller,TN791
  19. Studies on Grid-Connected Dfigwind Generation System Under Grid Fault,TM315
  20. The Research on the Maximum Power Point Trackin Control of Variable Speed Constant Frequency Generation System,TM614
  21. Simulation Research on Dual-pwm Converter Control of Doubly-fed Induction Generator,TM46

CLC: > Industrial Technology > Electrotechnical > Transformers, converters and reactors > Converter
© 2012 www.DissertationTopic.Net  Mobile