Dissertation > Excellent graduate degree dissertation topics show

Preparation Process Optimization of Mn-Zn Ferrite from Low-grade Manganese Ore

Author: XieChao
Tutor: XuLongJun
School: Chongqing University
Course: Safety Technology and Engineering
Keywords: Mn-Zn ferrite low-grade manganese ore co-precipitation method SiO2 doping magnetic property
CLC: TM277
Type: Master's thesis
Year: 2011
Downloads: 34
Quote: 0
Read: Download Dissertation

Abstract


Mn-Zn ferrite is a kind of essential electronic ceramic, and widely used in the electronics industry. The tons of Low-grade manganese ore （LMO） have become a serious environmental problem, and the comprehensive utilization of LMO has great benefit to both environment and economy. LMO was applied to preparing Mn-Zn ferrite by co-precipitation method after being leached in sulfuric acid medium in this paper. The effects of granule diameter, leaching time, liquid/solid ratio （V/W） and concentration of sulfuric acid were investigated through orthogonal and single factor experiments. X-ray powder diffraction （XRD）, Fourier Transform Infrared Spectrometer （FTIR）, Brunauer-Emmett-Teller （BET） specific surface area and Scanning Electron Microscope （SEM） were respectively applied to characterize characterizing the crystalline phases and the microstructures of samples, which were synthesized with different ratio of metal salts, pH and SiO2-doping. The magnetic measurements were carried out on Vibrating Sample Magnetometer （VSM）. The main conclusions could be obtained as follows.The optimal manganese extraction conditions of LMO were 0.054 mm of size, 120 min of reaction time, 3 （V/W） of liquid/solid ratio and 30% of concentration of sulfuric acid （g/g）. Under these conditions, the leaching efficiency could reach up to 96.7%. The kinetics of the leaching process was in accordance with characteristics of fractal reaction, the fractal-like kinetics parameters h and k 0being 1.65 and 5.51 min-1 respectively. The maintaining effect of manganese was rather significant with a recovery of 97.1%, whtle while the iron presented a recovery of 62.5% in the purification process.The saturation magnetization of Mn-Zn ferrite simultaneously increased with the increase of the ratio of zinc as it was less than 22.32%, and decreased on further increase in Zn concentration. Besides, its coercivity decreased with the increase of pH as it was below 7.5, but increased when it got over 7.5. As a result, the optimal sample could be obtained with a saturation magnetization of 55.02 emu/g, a coercivity of 8.20 G and a residual magnetization of 1.71 emu/g when the ratio of zinc was 22.32% and pH was 7.5.The results showed that synthesis ratio of precursor was strongly influenced by the co-precipitation temperature, could reached up to 87.9% （maximum value） at the temperature of 50℃. SiO2 doping enhanced the specific area of Mn-Zn ferrite with a proper amount. A certain amount of SiO2 doping （0-0.45 wt %） could improve the magnetic property of Mn-Zn ferrite, while excessive doping decreased the magnetic property due to change of its phase structure. When SiO2 doping was 0.45%, the optimal sample was obtained, which have had a saturation magnetization of 71.95 emu/g, a coercivity of 10.49 G and a residual magnetization of 1.32emu/g.

Related Dissertations

  1. Syntheses, Structures and Properties of Transition Metal Complexes Based on Pyridyl Ligands,O627.2
  2. The Preparation and Application of Amorphous Carbon Nanoparticles and Composite Materials,TB383.1
  3. Syntheses and Structures of Sulfur-Rich Compounds with Carboxylate and Imine Groups,O621.13
  4. Synthesis of Novel Ferrite Pigments and Its Application on Magnetic Inks,TQ622.15
  5. Study on the Preparation of High Peameability Ferrite Used for Anti-Electro-Magnetic-Interference from MnZn Soft Ferrite Wastes,TM277
  6. The Research on Preparation Technology and Sintering Behavior of Rare Earth Aluminates (Dy3Al5O12、 NdAlO3、LaAl11O18),TB383.3
  7. Wide Temperature MnZn ferrite materials and low-power transformer simulation,TM277
  8. Construction of Functional Magnetic Nanospheres and Removal of Simulated Dyeing Wastewater,X791
  9. N, Zn codoped Preparation and Application of Nano TiO_2 photocatalyst,O643.36
  10. Synthesis and Luminescent Properties of ZnSe Quantum Dots,O614.241
  11. Preparation of MnZn soft ferrite materials,TM277
  12. Investigations on V-doped ZnO by First-principles Calculations,TN304.7
  13. Fabrication and Properties of Nano-sized Powders and Transparent Ceramics of Lutetium Compounds,TQ174.1
  14. Preparation of Nano BaTiO3 and TiO2,TB383.1
  15. Preparation and Property Investigation of Fe3O4 and Fe3O4 @ Gd2O3:Eu Labeling Nanoparticles,TB383.1
  16. Design, Syntheses, Characterization and Property Studies of Porous Complexes with Flexible Carboxylic Acid,O641.4
  17. NiCuZn spinel ferrite Nanomaterials and Properties,TM277
  18. Study on the Preparation, Characterization and Properties of Yb: YGG Laser Ceramic Powder,TB383.1
  19. Study on Preparation, Characterization and Properties of Nd3+, Yb3+: Y2O3 Polycrystalline Materials,TB383.1
  20. Study of the Properties and the Quantum Structure Preparation of Dilute Magnetic Germanium,O484.1
  21. The Critical Behaviors and Magnetic Properties of Ferromagnetic Material Based on Bond Dilution and Random Crystal Field Blume-Emery-Griffiths Model,O482.5

CLC: > Industrial Technology > Electrotechnical > Electrical materials > Magnetic materials,ferrite > Ferrite,oxide magnetic materials
© 2012 www.DissertationTopic.Net  Mobile