Dissertation > Excellent graduate degree dissertation topics show

Preparation and Characterization of PP Microporous Membranes Via Thermally Induced Phase Separation

Author: XinTian
Tutor: YangHu
School: East China University of Science and Technology
Course: Material Chemical Engineering
Keywords: Thermally induced phase separation (TIPS) Polypropylene (PP) Dibutyl phthalate (DBP ) Tallow amine (TA)
CLC: TQ325.14
Type: Master's thesis
Year: 2011
Downloads: 175
Quote: 0
Read: Download Dissertation

Abstract


In this paper, the thermally induced phase separation Preparation of polypropylene microporous membrane , and the various factors affecting the performance polypropylene film . Firstly, by looking for the solubility parameter , and the combined graph of the transmittance of the various systems of different concentrations , and then test the mechanical strength of the various samples , and methods such as screening diluent comprehensive consideration, the use of beef tallow amine (TA) - phthalic dibutyl (DBP) the mixed diluents polypropylene microporous film . Secondly, the TA-DBP-PP system , changing the mass concentration of the mixed diluent tallow amine , to examine the influence of of tallow amine concentration on membrane performance . With the TA in the increase in the content of the diluents , the the polypropylene flat membrane flux is gradually increased, and the lower breaking strength of the polypropylene film . Then, in the TA-DBP-PP system , changing the concentration of the polypropylene , to examine changes in the concentration of polypropylene impact on membrane performance . With the increase of the concentration of the polymer , the number of table faces is decreased, the pore size of the membrane decreases . When the PP concentration of 20% , the pure water flux of the membrane can be achieved in about 120 L · m-2 · h-1 · bar-1 , the average pore size is 3.2 μm of polypropylene film , the film with a porosity of 61% . Using TH3988, NA-40 two kinds of nucleating agent added 2.4wt% NA-40 of the nucleating agent , the smaller the pore size of the polypropylene flat membrane , and the membrane structure is relatively close ; adding 2.4wt% of a nucleating agent TH3988 flat membrane structure is loose . With the rise of temperature of coagulation bath , the flux and an average pore diameter of the polypropylene film showed an upward trend. However, the mechanical strength of the film will decrease with increasing the temperature of the coagulation bath . In DOP coagulation bath , solidification the flux of the membrane obtained in the bath of the flux of the membrane obtained is superior in soybean oil .

Related Dissertations

  1. Micro - Preparation and Characterization of Nanometer SiC / polypropylene composites,TQ325.14
  2. Study on in Situ Alloy of Polypropylene/Polystyrene Blends.,TB332
  3. Research on Injection Foaming Molding of Polypropylene (PP)/Wood-Flour Composite,TB332
  4. Modified meltblown polypropylene nonwoven Preparation and Properties,TS176
  5. Synthesis of Phosphorus-containing Bicyclic Caged Flame Retardants and Their Application in Intumescent Flame Retardant Polypropylene Systems,TQ325.14
  6. Nylon and nano calcium carbonate modified polypropylene blends high performance research,TQ325.14
  7. Study on PP Toughened and Reinforced with Nano-SiO2,TB383
  8. Fabrication of Poly(Vinylidene Fluoride) Porous Membrane Via Thermally Induced Phase Separation,TQ320.721
  9. Study on in Situ Alloy of Polypropylene/Polymethylmethacrylate,TB332
  10. The Structure, Morphology and Properties of (Phenylene Sulfide) (PPS)/isotactic Polypropylene (iPP) In-situ Microfibrillar Blend,TB332
  11. Preparation of Synchronous Calcium Carbonate/Montmorillonite Compound Particles and Study of Reinforcing Polypropylene,TB332
  12. Study on in Situ Alloy of Polypropylene/Polystyrene(Styrene),TB333
  13. Study on Polypropylene/ Micron Inorganic Antibacterial Powders Blend Compounds and Fine Fibers,TQ342
  14. Study on Surface Grafting Polymerization of PP Tower Packings,TQ320.79
  15. Synergistic Effects of Compound Inorganic Particles Reinforcing and Toughening Polymer,TB332
  16. The nanopowder / polypropylene composites and the mechanical properties of,TB332
  17. Can be made of polyolefin preliminary study,TQ325.14
  18. Synthesis and Application of Polyurethane Sol to Hydrophilic Finishing of PP Fabrics,TS195.5
  19. Preparation of a polypropylene car Bumper,TQ325.14
  20. Study on Melting Intercalation Nanocomposites of Organic Rectorite/Polymer,TB383.1

CLC: > Industrial Technology > Chemical Industry > Synthetic resins and plastics industry > Polymer resin and plastic > Polyolefin plastic > Polypropylene
© 2012 www.DissertationTopic.Net  Mobile