Dissertation > Excellent graduate degree dissertation topics show

The Numerical Simulation and Experimental Study of Gas-Particle Two-Phase Compulsive Circumfluence Oriented Hole Surface Finishing

Author: YangXiaoChun
Tutor: YangShengQiang
School: Taiyuan University of Technology
Course: Mechanical Manufacturing and Automation
Keywords: two-phase flow finishing compulsive circumfluence numerical simulation
CLC: TG665
Type: Master's thesis
Year: 2011
Downloads: 22
Quote: 1
Read: Download Dissertation

Abstract


The technology of gas-particle two-phase compulsive circumfluence finishing is another kind of finishing method, which is proposed on the basis of spiral gas flow finishing and liquid-particle two-phase compulsive circumfluence finishing. The process of this method is the gas with a certain pressure was pushed through the circulation occurs device, compulsive circulation is formed by the gas. It stimulates particles to make circulation movement. The particles can collide, scratch and rolling the hole surface of workpiece, so as to achieve the purpose of finishing.The primary content of this paper includes:introduced some methods of hole surface finishing; expounded the theoretical knowledge and applications of spiral flow and two-phase flow; done theoretical analysis of the method of two-phase flow finishing; simulated, analyzed and compared the gas-particle two phase compulsive circumfluence finishing by FLUENT, the general sofeware of CFD, so as to design the shape of spral head. At last, designed the whole experimental device of gas-particle two-phase compulsive circumfluence finishing and using the device to verify the feasibility of this method.Clarifing the primary factors of finishing effect through theoretical analysis. Fixing the numerical simulation parameters by these factors. Comparing these factors, and mainly comparing the finishing effects of different inlet dip angel, the diameter of particle etc. Finaly, fixing the optimal parameters of finishing using gas-particle two-phase flow. Designing experiment device and doing experiment under these conditons. Numerical simulation and experiments results can provide some helpful foundation for later research on this subject.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. Study of the High Temperature Gas-Liquid Two Phase Flow Rate Proportional Conrtol Valve,V233.2
  7. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  8. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  9. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  10. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  11. Numerical Simulation of Biomass Direct Reburning,TK16
  12. Study of Effect of High Temperature Seperator on Hydrodynamices in CFB Boiler Furance,TK229.66
  13. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  14. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  15. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  16. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  17. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  18. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  19. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  20. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  21. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Special machine tools and processing > Light processing equipment and processing
© 2012 www.DissertationTopic.Net  Mobile