Dissertation > Excellent graduate degree dissertation topics show

Five-axis NC Machining Parameter Optimization and Energy Calculation of Propeller

Author: SuKai
Tutor: PengFangZuo
School: Huazhong University of Science and Technology
Course: Mechanical Engineering
Keywords: Propeller Modeling Tool-path Optimization Energy calculation
CLC: TG659
Type: Master's thesis
Year: 2011
Downloads: 83
Quote: 0
Read: Download Dissertation

Abstract


Marine propeller is an important component of marine power systems. The design and manufacture of marine propeller play an important role for improving the performance of the ship propulsion systems. Propeller blade is a typical part of free surface, which has large diameter and complex shape. The region between adjacent blades is narrow and prone to collides with tools. The production cycle of propeller is long, optimization of cutting parameters is an important issue that affects the efficiency of NC machining, and plays the important roles for improving product quality and productivity. In this thesis, the machining process planning, tool path generation, cutting parameters optimization, energy calculation and other issues of processing propeller with 7-5 axis lathe & mill machine tools have been studied.The formation of the propeller blades and geometric characteristics is analyzed in this thesis. The formula that transforms the data points from the local coordinate system into the global coordinate system is obtained and the coordinates of data points in the global coordinate system are calculated. Surface profile is obtained by fitting data points. Then leaf surface model is built.The propeller machining process is analyzed according to geometric characteristics. The leaf surface area is divided into overlapping and non-overlapping areas. Considering the requirement of propeller, the tool diameter and it’s reasonable angle used in the processing are calculated. And the step forward, stepover and scallop are also calculated. Then generation method of cut location point in side milling is given. Finally the interference-free tool path is gained. For the purpose of improve processing efficiency and quality, the force of NC machining is analyzed by Production Module. The cutting parameters are optimized, and then the processing code is generated.The energy calculation method of processing propeller with 7-5 axis lathe & mill machine tools is analyzed. The energy in processing is calculated and examples are given. The results show that machining in machine tool can reduce energy consumption by about 20% than wheel grinding by hand.

Related Dissertations

  1. The Realization of Coal Liquefaction in the Continum Model System and the Experimental Research of Coal Liquefaction,TQ529.1
  2. Soft Sensor of Naphtha Dry Point on Support Vector Machines Regression,TE622.1
  3. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  4. Coupled Calculation of the Solidification Paths of Ternary Eutectic Alloys Based on Thermo-Calc,TG111.4
  5. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  6. Tooth Profile Modeling and Machining Error Analysis of the Face Gear,TH132.41
  7. Investigation of Turbine S2 Stream Surface Direct Problem Aerodynamic Optimization Design,V235.11
  8. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  9. Reseach on Optimal Control of Elevator Group Based upon Ant Colony Algorithm,TU857
  10. Research on High Efficiency Interior Permanent Magnet Synchronous Motor,TM341
  11. Application of Interior-Point Theory for Reactive Power Optimization in Large Power Systems,TM714.3
  12. The Basic Research of Axial Flux Inductor Type High Temperature Superconducting Motor,TM37
  13. Research on HID Lamp Rectifying Effect,TM923.32
  14. A Simulation Study of the Effects of Ischemia to Spiral Waves in 2-D Human Ventricular Tissue,R318.0
  15. The Optimization of AVS Video Decoder on the PC Platform and Improvement of Field Decoding,TN919.81
  16. Research on Stability of Hierarchical Sattellite Network,TN927.23
  17. Service Model Driven Architecture (SMDA) Oriented Modeling Techniques and Tool Implemention,TP311.52
  18. Query Processing and Optimization in Massive Multi-Database Integration,TP311.13
  19. Research of Visualization Technology in the Virtual Test of Missile,TP391.9
  20. Research on Feature Extraction and Classification of Tongue Shape and Tooth-Marked Tongue in TCM Tongue Diagnosis,TP391.41
  21. Design and Simulation of Flight Management Computer System CDU Unit in Flight Simulation,TP391.9

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Program control machine tools, CNC machine tools and machining
© 2012 www.DissertationTopic.Net  Mobile