Dissertation > Excellent graduate degree dissertation topics show

Design and Implemention of the Hardware for Dual-arm Robot’s Embedded Control System

Author: WangXingChuan
Tutor: FangJianJun
School: North China University of
Course: Mechanical and Electronic Engineering
Keywords: Dual-arm robot Embedded System ARM PCI bus uClinux
CLC: TP242
Type: Master's thesis
Year: 2011
Downloads: 94
Quote: 0
Read: Download Dissertation

Abstract


Dual-arm robot is widely used to assemble parts、move objects etc. in the cases which one manipulator is not qualified and dual-arm operation is required. As living standard is improving, smart dual-arm robot has a good future in entertainment industry, chess playing robot for example. However, control system of in operation robots is built based on Personal computer (PC) plus motion control board.With the performance of embedded microprocessors remarkably increasing, a new ARM-based control system of robots trends to replace traditional one based on PC plus motion borad because new control system with smaller size, lower power consumption and better portability can meet the same system performance.PCI bus is a high-perfomance 32/64-bit local bus with 264MB/s@66MHz highest data exchange rate.This paper introduces an ARM-based control system embedded with PCI bus interface to control SCARA manipulator. The control system takes S3C2510A with ARM940T core because S3C2510A has integrated PCI interface and SDRAM.Hence, the hardware design can be simplified because no special PCI interface chip is required. Consequently, the stability of control system can be enhanced. Ethernet interface、USB interface、JTAG interface and UART serial interface are also integrated into hardware of control system for increasing its functions. The schematic diagram and PCB board are completed in Protel. The hardware is tested. Finally, PCI driver is programmed in Linux OS and Bootloader and uClinux operating system are deployed to enhance performance of 32-bit microprocessor.The designed control system with PCI bus can not only be used to control dual-arm robot but also any device which needs PCI Bus interface.

Related Dissertations

  1. Development of Car Control Center Based on ARM7,U463.6
  2. The Electric Power Steering System,U463.4
  3. Transplant of Windows CE Operation System Based on ARM9,TP316.7
  4. The Research of Moving Object Tracking System Based on Embeded Image Process Unit,TP391.41
  5. Development of Experimental Robot Control System Based on ARM,TP242.6
  6. Gui Design and Application Oriented to Embedded Ultrasonic Detecting System,TP274.53
  7. Data Collecting and Processing of Multi-Linear-CCD Visual Measuring System,TP274.2
  8. Research on Visual Servo System of Mechanical ARM,TP242.6
  9. Research on Software of TFT-LCD Testing Equipment Based on ARM,TN873.93
  10. LXI-VXI Adapter Design,TP274
  11. Research on Temperature Control System for High-Performance Oven-Control Crystal Oscillator (OCXO),TN752
  12. Signal Acquisition and Processing Platform Design and Implementation of Trawl Sonar System,S951.2
  13. Study of An Embedded Chinese Medical Therapeutic Apparatus,R197.39
  14. Development of Intelligent Interpretation System Based on ARM9,TP391.44
  15. Borehole imaging device based on embedded systems research,P634.3
  16. Remote areas, distribution transformer monitoring system design theft,TM421
  17. Study of the Mechanical Strcture of a De-Icing Robot for 220kV Transmission Lines,TP242
  18. Application of AWG in Decoy Protection Equipment,TN97
  19. Based on the embedded Web technology Research and Implementation of Dynamic Strain Gauge,TP368.1
  20. Design and Realization of GPS Monitoring System Based on WEB,TP311.52
  21. Study on Ethernet MAC Protocol and Its FPGA Implementation,TP393.04

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Robotics > Robot
© 2012 www.DissertationTopic.Net  Mobile