Dissertation > Excellent graduate degree dissertation topics show

Study on Structure of Triggering System of Main Switch in SG-Ⅲ Energy Module

Author: LiuNing
Tutor: HeMengBing；LinFuChang
School: Huazhong University of Science and Technology
Course: Pulsed Power and Plasma
Keywords: spark gap switch Marx generator fast rise-time trigger system
CLC: TM832
Type: Master's thesis
Year: 2011
Downloads: 15
Quote: 0
Read: Download Dissertation

Abstract


This paper generalized the development history of Pulsed Power technology and its application, and briefly introduced SG-III energy module. It summarized the development process of Marx generator, and the current research status of the compact Marx generator at home and abroad.With the advantage of great through-flow capacity to transfer the charge between two-electrode gap switches, this type of switch has been widely used in the high-power pulsed power supply system. Basing on the theoretical research and simulation calculation, this paper described a set of trigger system, which was designed for two-electrode gap switch of SG-III energy module, and has safe and steady operation with high trigger voltage, fast rise-time, low jitter. Tests and measurement was carried out to check the performance of this system.According to the corresponding theory of fast rise-time Marx generator, in order to meet the requirement of output pulse voltage waveform (Amplitude>120kV, Rise time<30ns), this paper describes how the internal structure and external charging and trigger system of Marx generator were designed.The internal structure design include the selection of components, the calculation and simulation of circuit and the electrostatic field simulation of spark gap switch. External charging and trigger module design include the circuit design and layout of component. With the calculation of main internal parameter, a simulation model can be create by ATP, through which the output pulse voltage waveform with and without voltage divider was simulated. The output waveform reflects the information about output pulse rise time, amplitude, pulse width, and so on. Simulation results show that the no-load peak amplitude of waveform is 154kV and rise time is 12ns, both of which meet the requirement.In the aspect of experiments, the results are: the charge voltage is 20kV,The amplitude of output voltage waveform is 140kV and rise time is 13ns, which satisfied the requests of SG-III energy module. Dry air was selected as the inner insulation gas inside Max generator, and the pressure is 110kPa. Stability experiments were carried out and structure of gaps was also improved so as to intensify the stability of Marx generator and avoid the potential insulation defects.

Related Dissertations

  1. Research on Trigger System of Surface-breakdown High-voltage Switch,TM564
  2. Engineering Application Research of High Coulomb and High Current Gas Spark Switch,TM564
  3. A Novel Combined Switch Based on GaAs PCSS and Sparp Gap: Experiments and Analysis,TN25
  4. The Research of a Non-Second High-Voltage Pulse Generator for Algae Extinguishing,TN782
  5. Corona stabilizing switches research,TN135.2
  6. Compact design of high-voltage nanosecond pulse power,TN86
  7. Ball gap switch cooling gas flow field analysis and design optimization,TM564
  8. All solid repetition rate Marx generator key technology research,TN782
  9. Application of the Distributed Central Timing Trigger System on the EAST Superconductive Tokamak,TL631.29
  10. Thyristor power pulse power of Marx,TN78
  11. VME - based programmable plug - in BES trigger system,TN79
  12. Study on the Photoelectric Firing and Monitoring System for High Voltage Thyristor Valves,TM764
  13. Studies on the Discharge Characteristic and Power Supply of TEA CO2 Laser,TN248
  14. Investigation of Spark Gap Switch Multi-pulse Operating in the Self-breakdown Mode,TN78
  15. Study on MARX Generator Discharge Circuit and Pulse Forming,TN722
  16. Study on the Selection of Semileptonic Top Events in ATLAS,O572.33
  17. Preliminary Investigation of Hydrogen Spark Gap Switch,TM564
  18. Investigation of Transmission Line Based 3-stage Pulse Generator,TN782
  19. Development of Rotary Arc Gap-Switch in Axial Magnetic Field,TM564
  20. Trigger System on Reverse Beta Decay Reaction Chain of Anti-electron-neutrino,O572.321

CLC: > Industrial Technology > Electrotechnical > High Voltage Engineering > High voltage test equipment and measurement techniques > High voltage devices
© 2012 www.DissertationTopic.Net  Mobile