Dissertation > Excellent graduate degree dissertation topics show

Citrate Method Perparation and Dielectric Properties of Ba1-xSrxZr0.2Ti0.8O3 Ceramics

Author: LinMingJin
Tutor: XuQing
School: Wuhan University of Technology
Course: Materials Science
Keywords: Ba1-xSrxZr0.2Ti0.8O3 Citrate method synthesis Composite ceramics Sintering Dielectric properties
CLC: TQ174.1
Type: Master's thesis
Year: 2011
Downloads: 17
Quote: 0
Read: Download Dissertation

Abstract


based dielectrics appear as promising candidate materials of ceramic capacitors for energy storage usage because of their high dielectric constants, low dielectric losses and good insulation strength. This dissertation is devoted to chemical method preparation, structure and dielectric properties of Ba1-xSrxZr0.2Ti0.8O3 based composite dielectric ceramics. The powders of Ba1-xSrxZr0.2Ti0.8O3 (x=0.05-0.20) and MgO-CaO-Al2O3-SiO2 (abbreviated as MCAS) glass were prepared by citrate method synthesis. The composite ceramics with the nominal composition of Ba1-xSrxZr0.2Ti0.8O3 (x=0.05-0.20)+x wt% MCAS (x=3-8) were fabricated from the powders and the structure and dielectric properties of the composite ceramics were investigated.Ba1-xSrxZro.2Tio.803(x=0.05-0.20) powders were synthesized from a citrate route. The contributing factors to the phase purity and morphology of the powders have been examined. The powders with a pure perovskite phase and uniform particles of about 60 nm were produced at a calcination temperature of 650℃. Moreover, superfine powder of the MCAS glass with the average particle size of about 80 nm was derived from a citrate precursor at 600℃.The sinterability, structure and dielectric properties of the composite ceramics made from superfine Ba0.95Sr0.05Zr0.2Ti0.8O3 and MCAS powders were examined with respect to the content of the MCAS component. The MCAS component was found to be efficient in lowering the sintering temperatures of the composite ceramics. The composite specimens sintered at 1160℃showed fined-grained microstructures (～180 nm) and relative densities above 95%. The addition of the MCAS component led to a reduced bias-field-dependence of dielectric properties and an obvious dielectric relaxor behavior for the composite specimens.The sinterability, structure and dielectric properties of the composite ceramics with the nominal composition of Ba1-xSrxZr0.2Ti0.8O3(x=0.05-0.20)+x wt% MCAS were examined with respect to the content of the Sr component. The results indicated that the dielectric constant decreased and the loss increased with increasing Sr content. The composite specimen of Ba0.95Sr0.05Zr0.2Ti0.8O3+5wt% MCAS showed the optimum overall properties. Under the bias field of 140 kV/cm, the composite specimen displayed an energy storage density of 0.42 J/cm3 and an energy storage efficiency of 83.4%.

Related Dissertations

  1. Preparation and Tribological Properties of TZ3Y20A-SrSO4 Ceramic Matrix Composites,TB332
  2. The Preparation and Properties of Reed Woodceramic,TQ174.1
  3. Fabricationand Properties of SiC-AlN Multiphase Ceramics Prepared by Gelcasting,TQ174.62
  4. Study of the Water-Inrush Mechanism and Prediction of the Water-Resisting Floor,TQ133.1
  5. Lithium anode material calcined alumina crucible Development,TQ174.6
  6. Modification of Thermosetting Resins by High Performance Liquid Crystalline Epoxy Resin,TQ323.5
  7. The Study of Microstructure and Performance of La2 O3+CeO2-Ni-WC Composite Coating by Vacuum Fusion Sintering,TG174.44
  8. Preperation of Low Friction and Wear Resistant High-Purity Alumina Ceramic,TQ174.1
  9. Microwave drive power and microwave sintering furnace study,TN015
  10. Li ferrite temperature Preparation and simulation applications,TM277
  11. Boron nitride fiber reinforced ceramic matrix composites through the waves and Properties,TB332
  12. Study on the Preparation and Doping Y2O3 of Low-voltage ZnO Varistor Ceramics,TN304.93
  13. Preparation and Selective Laser Sintering of Carbon Fibre/polyamide 12 Composite Powders,TF123.74
  14. Analysis on Mechanism and On-line Monitoring System of Acoustic Emission Oriented to Precision and High Efficiency Grinding,TG580.1
  15. Tribological Properties and Corrosion Resistance to Molten Steel of （ZrB2-ZrO2）/BN Composites,TB332
  16. Fabrication and Properties of BaZrO3/BaCeO3-Based Composite Proton Conductors,O611.4
  17. Experimental and Analytical Study on Sinter Mixture’s Drying Process,TF046.4
  18. Study on Preparation and Properties of Aluminum Matrix Composites Strengthened by Nano-SiC Particles,TB331
  19. Preparation and Characteristics of SrHfO3 :Ce Scintillator Ceramics,TQ174.1
  20. Reaction sintering study prepared porous TiB_2-TiC composite ceramics,TQ174.65
  21. Study on Ceramic Material of MgTiO3-CaTiO3 System in High Frequency,TQ174.1

CLC: > Industrial Technology > Chemical Industry > Silicate > Ceramic Industry > Basic theory
© 2012 www.DissertationTopic.Net  Mobile