Dissertation > Excellent graduate degree dissertation topics show

Research on the Optimization of the Cutting Part Reducer of the Road Header

Author: GaoYang
Tutor: KongDeWen
School: Jilin University
Course: Mechanical Engineering
Keywords: road header cutting part planetary gear reducer optimization
CLC: TH132.46
Type: Master's thesis
Year: 2011
Downloads: 223
Quote: 0
Read: Download Dissertation

Abstract


Reducer is an important component of the cutting part of a road header. The performance of the reducer affects the quality of the road header significantly. Planetary gear reducer is widely used, because of its high transmission efficiency, wide range of transmission ratio, small size and light weight.The contribution of this work is to provide an optimized design of the reducer. The research process includes virtual prototype simulation based on CAD/CAE/CAM software and optimization module of the MATLAB. The innovative optimization method could decrease time and costs during design process.At the first part of this paper, a 3D prototype of the cutting part is built up using UG and CAXA. Gear profiles can be generated in CAXA with input parameters, such as number of teeth, modules, pressure angles, modification coefficients, etc. Gear profiles are exported as IGES files and imported into UG to build and assemble a detailed 3D prototype.Secondly, calculation of gear teeth-distributing principles and strength conditions of planetary gear transmission is given to provide a direction for optimization programming. On the other hand, strength checking on input shaft, transmission shaft and output shaft has also been carried out.At last, MATLAB is employed in optimization with the minimum reducer volume as object function. Care has been taken to restriction of planetary gear teeth-distributing conditions (transmission ratios, concentric conditions, adjacent conditions, assembling conditions) and gear design conditions (tooth contacting overlap ratio, tooth number and modification coefficient, tooth width coefficient, contacting strength conditions of gear surface and gear bend strength conditions). According to the optimization, design results which meet all constraint condition requirements are obtained and some of the parameters are rounded. The volume has been reduced by 3.5%, while the cost cut down significantly.

Related Dissertations

  1. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  2. Investigation of Turbine S2 Stream Surface Direct Problem Aerodynamic Optimization Design,V235.11
  3. Reseach on Optimal Control of Elevator Group Based upon Ant Colony Algorithm,TU857
  4. Research on High Efficiency Interior Permanent Magnet Synchronous Motor,TM341
  5. Application of Interior-Point Theory for Reactive Power Optimization in Large Power Systems,TM714.3
  6. The Basic Research of Axial Flux Inductor Type High Temperature Superconducting Motor,TM37
  7. The Optimization of AVS Video Decoder on the PC Platform and Improvement of Field Decoding,TN919.81
  8. Research on Stability of Hierarchical Sattellite Network,TN927.23
  9. Query Processing and Optimization in Massive Multi-Database Integration,TP311.13
  10. Research on Feature Extraction and Classification of Tongue Shape and Tooth-Marked Tongue in TCM Tongue Diagnosis,TP391.41
  11. Studies on Fermentation Optimization, Purification and Enzyme Characteristics of Lipase from Aspergillus Oryzae FS-1,TQ925.6
  12. Large the Hongshan iron ore mine personnel tracking positioning system optimization study,TN929.5
  13. Computing Minimum Distance between Curves/Surfaces Based on PSO Algorithm,O182
  14. Analysis of Nutritional Compositions and Quality of Shishen (Eremurus Chinensis Fedtsch.),S647
  15. 1 - deoxynojirimycin synthetic route design and process optimization,TQ463.5
  16. Optimization of Fermentation Conditions, Purification, Cloning and Expression of a Cold-active Lipase from Pseudomonas Sp.RT-1,TQ925
  17. Breeding of Fungal α-amylase High-producing Strain by Genome Shuffling,TQ925
  18. Hot air drying characteristics of lettuce osmotic dehydration mass transfer kinetics and permeability,TS255.52
  19. Study on Application of Red Yeast Rice in Fermented Sausage,TS251.65
  20. Active Power Filter and Its Application in Distribution Network,TN713.8
  21. On Governance Optimization in the Vision of the Network Politic,D630

CLC: > Industrial Technology > Machinery and Instrument Industry > Mechanical parts and gear > The transmission mechanism > Meshing > Reducer and transmission
© 2012 www.DissertationTopic.Net  Mobile