Dissertation > Excellent graduate degree dissertation topics show

On Numerical Simulation of Forming by Tubular Parts and Tension Spinning

Author: YangJie
Tutor: MaShiCheng；WuFuJia
School: University of North
Course: Aviation Aerospace Manufacturing Engineering
Keywords: spinning forming process finite elements numerical simulation
CLC: TG376
Type: Master's thesis
Year: 2011
Downloads: 54
Quote: 0
Read: Download Dissertation

Abstract


Spinning forming technique is a plastic processing technology of continuous partial point-wise deformation. It can produce sophisticated and complex parts with high strength and excellent mechanics capability, and it is often the most effective way to manufacture thin-walled hollow rotary parts. Aerospace and defense industries have the more need of small accounts of precise thin-wall spinning parts. Tension spinning technology was invented to supply the need. It usually depends on empirical value when designing shaping parameters of the spinning process, and simply analyzes the defects reasons in the forming process, so it just can provide limited help to prevent defects. In order to improve this situation, this paper puts forward finite elements numerical method. This kind of method can improve the reliability and efficiency of the process design by simulating the forming process.This paper systematically reviews the application and development of numerical simulation in the spinning forming process, and process designs of the actual workplace’basic dimensions and material property based on the empirical approach are made for spinning and tension forming process, and basic technological parameters are shown. This paper also establishes geometrical model and calculates and simulate it after operating cell property of unit distribution, meshing and adding restrictions load for it. Under this condition, stress-strain analysis in the forming process is obtained. Base on the analysis of the steady-state, it gets various factors that influence the forming process in the numerical simulation of the forming process and achieve the purpose to validate and analysis the rationality of technological parameters. At last, this paper prospects the future of the second technology of finite element analysis software based on the existing problems produced by finite elements software during the simulation process.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  21. Numerical Simulation and Experimental Study of Air-Assisted Sprayer of Orchard,S491

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Extrusion > Extrusion process
© 2012 www.DissertationTopic.Net  Mobile