Dissertation > Excellent graduate degree dissertation topics show

Application of process control models roll length plate pinch

Author: JiaZhenHong
Tutor: HuangQingXue
School: Taiyuan University of Science and Technology
Course: Control Theory and Control Engineering
Keywords: plate pinch roll cut-to-length process control model function diagram
CLC: TG333.2
Type: Master's thesis
Year: 2011
Downloads: 43
Quote: 0
Read: Download Dissertation

Abstract


Pinch roll is an important equipment in cut-to-length line and its control accuracy directly influences the product quality. At present,the general control scheme is that anteroposterior measuring roll is used to measure cutting length, the control algorithm is completed by PLC controller and the control variable is transfered to drive through Profibus DP in real-time. There exsit two problems in the control scheme, one is the device-depended error caused by mechanical equipment accuracy can not be compensated; the other is the control error caused by inaccuracy control model can not be revised. The cut-to-length control accuracy is affected considerably due to these two reasons and the application of this control scheme is not satisfactory. So most of the plate steel plant give up this control scheme and adopt manual length cut or mechanical length cut. This lead to low efficiency in length cut and impact seriously on plant productivity.According to problems existing in feed-to-length scheme of measuring roll, A new feed-to-length process control model is proposed after systematic analysis on plate length cut process. The process control model establishes the system detecting components configuration depending on different length cut range and the minimum length cut. The process model caculation is completed by process control computer and partial position regulation loop is completed by the drive, so the feed-to-length model obtains high dynamic response and position control accuracy. The experimentaion and practical application of results indicate that when the sample cut Lsamp= 100 400mm,length cut Lleng= 3 6m,plate thickness h = 4 25mm,velocity v = 0.2 0.5 m /s,the control accuracyδ< 3mm.According to the project of 2250mm hydralic roll-cut sampling shear, Hunan Valin Lianyuan Iron and Steel Co.,Ltd,first this paper discusses the position control and grade speed control theory that influence the length cut accuracy, and analyzes vector control model of drive and conducts simulation of length cut control model of pinch roll,then gives details of plate length cut process and electrical drive system, at last from the perspective of the experimetation and practical application this paper makes systematic analysis of the implementation of length cut process control model,focuses on solving the implementation of process control model, also discusses the problems exsisting in practical application.

Related Dissertations

  1. Heat Transfer Performance of the Metallic Honeycomb and Regenerative Cooling Channel,V215.4
  2. Solid-State Fermentation Process for Production of Antimicrobial Lipopeptide by Bacillus Amyloliquefaciens ES-2-4,TQ936.16
  3. Comparative Efficacy with Locking Plate and the Normal Plate for Treatment of Elderly Tibial Plateau Fractures in Schatzker Ⅱ, Ⅲ Type,R687.3
  4. Research on Control Algorithm of Ball&Plate System,TP13
  5. Preliminary Effects of Clavicular Hook Plate Technique on Treating Acromioclavicular Joint Dislocation,R687.3
  6. Effect of Anatomic Locking Compression Plate and Dynamic Hip Screw in Treatment of Femoral Intertrochanteric Fracture,R687.3
  7. The Outcome between Interlocking Minimally Invasive Percutaneous Plating and Interlocking Intramedullary Nailing in Treating with Fractures of the Lower Tibia,R687.3
  8. Minimally Invasive Locking Plate Fixation for Treatment of Pilon Fracture,R687.3
  9. Open reduction and internal fixation combined with bone intra-articular calcaneal fractures efficacy analysis,R687.3
  10. Research on Early Age Shrinkage-Cracking Characterization of Concrete with Multi-Components Admixtures,TU528
  11. Correlation of Single Nucleotide Polymorphisms of NPR3 Gene and COL11A2 Gene with Idiopathic Short Stature,R723
  12. Numerical Simulation and Research of Plate in the Process of Roller Quenching,TG156.3
  13. Study on Fuzzy Logic-based License Plate Recognize System,TP391.41
  14. Multi- license plate location method based on CNN's Intelligent Transportation Systems Research,TP391.41
  15. Process Research on Fiber Laser-MIG Hybrid Welding Medium Thickness Aluminum,TG456.7
  16. The Design on Kinematic Structure & Control System of the New Plate Bending Machine,TG333.24
  17. Design and Fabrication of Micro-hotplate Based on MEMS Technology,TK172
  18. Pull-in Characteristic Analysis of Electrostatic Micro-actuators,TP211.4
  19. 2205 hot workability and mechanical properties of stainless steel clad plate and Prediction,TG142.71
  20. Battle tanks in tank bottom detection technology,TE972
  21. Thin steel plate wave electromagnetic ultrasonic flaw detection technology research,TG115.284

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Rolling > Rolling mill machinery equipment > Rolling auxiliary equipment
© 2012 www.DissertationTopic.Net  Mobile