Dissertation > Excellent graduate degree dissertation topics show

Composite materials by mechanical shear load connector pin load distribution of

Author: LiuWuZuo
Tutor: WangHai
School: Shanghai Jiaotong University
Course: Aircraft design
Keywords: Composites Shear loads Pin load distribution Finite element model
CLC: V229.7
Type: Master's thesis
Year: 2012
Downloads: 110
Quote: 0
Read: Download Dissertation


Related Dissertations

  1. Study on Characteristics of Contiuous Fiber-Reinforced Metal Matrix Composites under Hypervelocity Projectile Impact,TB332
  2. Preparation and Tribological Properties of TZ3Y20A-SrSO4 Ceramic Matrix Composites,TB332
  3. Reactive Hot-Pressing and Mechanical Properties of (ZrB2-ZrO2)/BN Composites,TB332
  4. The Establishment and Preliminary Application of the Three-dimensional Finite Element Model of Ankle Joint,R687.3
  5. Schiff base Synthesis, Characterization and Antibacterial Properties,O641.4
  6. Closed thin-walled beams composite modal damping prediction,TB33
  7. Carbon fiber reinforced epoxy resin surface treatment and interfacial properties of composite materials,TB332
  8. Synthesis and Visible Light-Driven Photocatalytic Performances of Silver Halide/Conducting Polymer Nanocomposites,TB383.1
  9. Reaction Sintering Preparation of Titaniferous Compound Ceramic Composites by Two-step Method,TQ174.1
  10. Preparation and Investigation on the Properties of Three-Dimensional Braided Quartz Fiber Reinforced Composites,TB332
  11. Studies on Damping Modification of Fiber Reinforced Composites,TB332
  12. Studies on Genotoxicity of Two Novel Contraceptive Materials,R114
  13. Enclosed space complex three-dimensional simulation of diffusion of gas leaks,TP391.9
  14. Large composite structures falling weight impact test technique,TB302
  15. Wood composite viscoelastic constitutive heat and thermal forming simulation study,TB332
  16. Preparation of Fe3O4-MWCNTs Nanocomposites by Microwave Assisted Polyol Method and Their MRI Enhancement Properties,TB383.1
  17. Research of Preparation Technology of High Performance and Low Cost Aluminum Composite Materials,TB331
  18. Fabrication of Microscale Ordered-reinforced Composite and Its Mechanical Characterization,TB33
  19. Three-dimensional angle interlock woven composites mechanical properties of low-velocity impact and Finite Element Analysis,TB332
  20. Particle reinforced copper matrix composites mechanical behavior of finite element analysis,TB331

CLC: > Aviation, aerospace > Aviation > Aircraft Construction and Design > Aviation mechanical components,standard parts,profiles > Composites and sandwich elements
© 2012 www.DissertationTopic.Net  Mobile