Synthesis, Characterization and Evalution of Spinel Type Mixed Oxides As Environment Protection Additive for FCC Process

Abstract

Related Dissertations

1. Research on the Lumped Reactions Kinetic Model for FDFCC Process,TE624.41
2. Study on Preparing for Bio-fuel Oil from Catalytic Cracking of Rosin,TE667
3. Study on Combustible Gas Production from Biomass Catalytic Pyrolysis,TQ352.2
4. New kaolin desulfurization catalysts and adsorbents,TE624.5
5. Experimental Study on Catalytic Cracking of Biomass Tar Using a Model Compound,TQ546
6. Different properties of catalytic cracking feedstock,TE624.41
7. Applied Fundamental Study on Coker Gas Oil Catalytic Pyrolysis and Coker Naphtha Upgrading Based on TMP Technology,TE624.41
8. The Study of Producing PEW and Chemical Modification,TQ316.3
9. Kinetic Model Study on Naphtha Catalytic Cracking for Ethylene and Propylene Production,TQ221.21
10. Acidic catalytic cracking catalyst modulation and hydrogen ion exchange research,TE624.41
11. FDFCC process lumped kinetic model,TE624.41
12. Investigation of Preparing Liquid Fuels from Fats by Catalytic Cracking,TE667
13. Parameter Optimization Configuration of Tar Removal in Biomass Gasification Process,TQ546
14. C_4 Law of Light Hydrocarbon Catalytic Cracking,O643.32
15. FCC gasoline desulfurizer,TE624.8
16. Commerical Application of a Two-Stage Riser Fluidized Catalytic Cracking Technology,TE624.41
17. Molten Salt Synthesis of MgAl₂O₄ Spinel and Preparation of Porous Spinel Material,TB383.4
18. Molten Salt/spinel-based Composite Phase Change Heat Storage Materials Prepared by In-situ Reaction Process,TB34
19. Study on Technology Simulation and Improvement for FCCU Main Fractionator and Absorption-stabilization System,TE624.41
20. Application Research of Used Al₂O₃-MgO-C Bricks to Medium and Small Blast Furnace Trough,TF573