Dissertation > Excellent graduate degree dissertation topics show

Simulated Study on Reducing the Hydraulic Accumulator in the Starting Vibration of Vibration Compactor

Author: WangZuo
Tutor: YaoHuaiXin
School: Chang'an University
Course: Mechanical Design and principles
Keywords: vibration compactor emulate study hydraulic accumulator dynamic analyze electromagnetic relief value accumulator
CLC: TU661
Type: Master's thesis
Year: 2008
Downloads: 98
Quote: 2
Read: Download Dissertation

Abstract


In this paper, hydraulic impact that caused by the hydrodriving vibration compactor in the course of the starting vibration and the measures of reducing the hydraulic impact were studied. On the basis of analyzing the reason that produce hydraulic impact,the dynamics of mechanical of vibration compactor and dynamics of vibration hydraulic system were analyzed, the mathematics model of vibration hydraulic system was simulated and its output models for pressure and flow were deduced. On studying the impact reason the starting vibration of hydraulic impact questions are found ,and search solving measure. For press system to carry on dynamic state analysis towards rising to flap to pound at the bane result in and pressing the vibration round of hydrodriving vibration compactor to learn into the action to the vibration analyze, folio type the vibration liquid of the back track, build up a liquid to press calculation model that pound at pressure value. In order to decreasing hydraulic impact, the principle is analyzed to eliminate or increase hydraulic impact by means of changing eccentric lump structure to cut down the inertia force of starting, changing the pressure of pilot electromagnetic relief valve and changing the parameters of accumulator. Imitate true model through the mechanical system of the establishment vibration, be to kinetics and dynamics characteristic of mechanical system carry on accurately imitating a true calculation. Build up the electromagnetism overflows to flow valve and change to imitate true model toward the valve and press vibration system to carry on to the liquid certain under the work condition of imitate a true research.. Do not add an accumulator and add an accumulator to the vibration system ability machine under two kinds of different circumstances, the non- line form dynamic state of the system model, and carried on to this system analysis. Finally, a simulation research about the means of relief valve to reduce hydraulic impact is carried out, which prove the founded prove founded mathematics model. Also, some pending coefficients are amended and the optimum pressure of relief valve is determined. At the same time, a simulation research about the means of accumulator to decrease hydraulic impact is carried put, in which the optimum primitive capacity of accumulator was determined.

Related Dissertations

  1. Design of Controller on Solar LED Lighting System,TM923.34
  2. Study on Intelligent LED Street Lighting System Powered by Stand-Alone Photovoltaic Power Generator,TM923.4
  3. Research on Characteristic Simulation of Energy Regenerative System of Hydraulic Hybrid Vehicle,TH137
  4. Design and Simulation of Hydro-Mechanical Continuously Variable Transmission,TH132.46
  5. Research on Bipv’s Maximum Power Point Tracking in Electrical Energy Storage System,TM615
  6. Design and Simulation of a Hydraulic Anti-shock System Based on AMESIM,TH137.9
  7. Radar signal sorting Tracker Design and Implementation,TN957.51
  8. Development of Electro-Hydraulic Proportional Lift System for Simulation Test Rig of Sucker Rod Pump Units,TE933.1
  9. The shield cutter rotary drive hydraulic system modeling and simulation research,U455.31
  10. Frequency electric forklift lift system with accumulator Energy Research,TH242
  11. Study on Thermal Performance of PCM Trombe Wall System,TU551
  12. Dynamic Experiment Research on the ASHP Energy Storage Hot Gas Defrost,TB657.2
  13. A Weighted Decision Tree-Based Fast Intrusion Detection Model,TP393.08
  14. The Research and Test of the Noises-control Device Used in Special Ship Hydraulic Steering System,U664.41
  15. Research of POGO Vibration in Liquid Rockets,V434
  16. Development of Seawater Reciprocating Pump Driven by Oil Hydraulics in Ships,U664.58
  17. Research and Experiment on Acceleration Principle of 120-ton Injection Molding Machine Using Accumulator,TQ320.52
  18. The Parameters Optimization of High Response Vibration Testbed Electro-Hydraulic Integrated Controller,TB534.2
  19. Research on Ring Signature and Ring Signcryption,TN918.1
  20. Research on Authentication Techniques with Privacy Preserving in Vehicular Ad-hoc Networks,TN929.5
  21. The Experimental Research on the Laws of Oil Source,rolling Force and Accumulator at the Inlet of the Valve,TG334.9

CLC: > Industrial Technology > Building Science > Construction machinery and equipment > Compaction machinery > Static role of compaction machinery
© 2012 www.DissertationTopic.Net  Mobile