Dissertation > Excellent graduate degree dissertation topics show

Kinematic Design and Static Stiffness Analysis of a Novel 5-Axis Hybrid Reconfigurable Robot

Author: SunTao
Tutor: SongZuoMin
School: Tianjin University
Course: Mechanical Design and Theory
Keywords: Parallel manipulator Reconfigurable Dimensional synthesis Stiffness analysis Finite element
CLC: TP241.2
Type: Master's thesis
Year: 2008
Downloads: 120
Quote: 3
Read: Download Dissertation

Abstract


With the aid of the 863 Project, to meet the demand for the manufacturing equipment of multi-axis, multifunction and reconfigurability used in the national automotive industry, this thesis investigates into the design theory and method of the Tricept IV robot——A Novel 5-Axis Hybrid Reconfigurable Robot possessing proprietary intellectual property rights, research contents including inverse position analysis and Jacobian matrix analysis, dimensional synthesis, stiffness modeling and analysis. The following works have been accomplished.1. Inverse position analysis and Jacobian matrix analysis. Referring to the characteristics of the Tricept IV robot, which is decomposed into parallel subsystem and serial subsystem, a method of inverse position analysis considering the performance of stiffness is proposed. The Jacobian matrix of parallel subsystem is formulated using the screw theory and the matrix is simple and has definite physics meaning.2. Dimensional synthesis. A method of dimensional synthesis of the two subsystems respectively is proposed. The effect of the dimensional parameters of the parallel subsystem and the height of subspace to the kinematics performance is investigated by means of monotonic analysis. Dimensional synthesis of the parallel subsystem considered as a problem of nonlinear programming including constraint.3. Stiffness analysis. The stiffness modeling of parallel subsystem and serial subsystem is formulated respectively by using virtual work principle assuming one of them is rigid. The stiffness model of entire system is then achieved by linear superposition. The finite element analysis of the mechanism of representative position in workspace is investigated using Solidworks and ANSYS Workbench software and verify the availability of theory modeling of stiffness.4. Sensitivity analysis. Appropriate stiffness index is selected, and with the aid of the sensitivity analysis and theory modeling of stiffness, the effect of component stiffness and design Variables of dimensional synthesis to stiffness index is investigated and provide a theoretical basis for prototype design of Tricept IV robot.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  4. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  5. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  6. Simplified Analysis of Semi-Rigid Steel Frames under Vertical Loading,TU391
  7. Based on Nonliner Finite Element Analysis of the Infilled Wall Frame Structure,TU323.5
  8. The Research on a New Modular Self-Reconfigurable Robot,TP242.2
  9. Analysis and Control of 6-DOF Electrical Driven Parallel Manipulator,TP242.2
  10. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  11. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  12. Design of Testing Equipment for Electronic Products,TN06
  13. S-lay Installation Analysis for Deepwater Pipeline,TE973
  14. Research on Intelligent Aerial Bomb for Forest Fire Fighting,S762
  15. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  16. The Analysis and Comparison of Adjacent Segment Degeneration of the Finite Element Caused by Three Posterior Lumbar Fusion Style,R687.3
  17. The Establishment and Preliminary Application of the Three-dimensional Finite Element Model of Ankle Joint,R687.3
  18. The Study of Microstrip Antenna in Frequency Reconfiguration and Co-design with Filters,TN822
  19. Different Bottom Structure of Dental Brackets Affect the Adhesiveness-Three Dimensional Finite-element Analysis,R783.5
  20. Airborne radar antenna pedestal rapid design systems research and development,TN959.73
  21. Sham hose drum drive means and hydraulic system of the structure,TE973

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Robotics > Manipulator > Industrial robot
© 2012 www.DissertationTopic.Net  Mobile