Dissertation > Excellent graduate degree dissertation topics show

Distortion Correction of Parallel Screw Thread Based on Non-Contact Measurement

Author: ShenShaoFeng
Tutor: ShenMengHong
School: Zhejiang University
Course: Mechanical Engineering
Keywords: automatic valve inspected pipeline CCD-based visual inspection distortion correctness
CLC: TG85
Type: Master's thesis
Year: 2012
Downloads: 52
Quote: 0
Read: Download Dissertation

Abstract


Threaded connections are generally used in connecting valves with other components. In order to ensure the quality of the connection, the valves which have high requirements of air tightness must be inspected one by one. With the increasing of labor costs and valve quality requirements, it will make good sense to research on automatic valve inspected pipeline.CCD-based visual inspection of thread parameters is a good way for automatic measurement on line, meanwhile, it easy to integrate. However, CCD-based visual inspection of thread parameters has the following problems:Thread form will cause distortion, when measuring parallel screw thread parameters based on non-contact method. The traditional way is adjusting the optical axis to a suitable angle with the thread axis to acquire the real thread form projection, which has some defects, such as time consuming, not suit for pipeline, higher-precision equipment for adjustment and so on. Hence, a new method through digital image calibration is presented. Beginning with the thread geometrical principle, the mathematical model is given out. With the above thread mathematic model, images obtained from camera are corrected and real thread form can be got. With the results of related experiments and simulation, the mathematic model is certified.The first chapter introduces the background and relevant theory of CCD-based visual inspection, and then describes its research status.The second chapter describes the overall design and station mechanical structure design of automatic detection valve pipeline.The third chapter introduces the design of CCD-based visual inspection.The forth chapter researches on thread distortion mathematical model.The fifth chapter researches on the correction process of thread image distortion, and demonstrates the correctness of the model.The sixth chapter summarizes the contents of this study, and gives out the points which need to be researched further.

Related Dissertations

  1. Study of Mechanism Using Two-Direction Pre-Stress to Control Welding Distortion and Hot Cracking,TG404
  2. The Research and Realization on Asymmetric Sine Inverter with Adjustable Frequency and Amplitude,TM464
  3. Rate-distortion Optimization Based Rate Control,TN919.81
  4. Study on the Law of Strata Distortion Due to Tunnel Construction with Shield on Harbin,U455.43
  5. Study on Mechanical Behavior of Low Alloy Steel Transformation During Welding,TG457.11
  6. Numerical Simulation of Deformation in Low Carbon and /HSLA Thin Plate Welding,TG404
  7. Cost Revelation Mechanism of Equipment Acquisition,F426.72
  8. The Distortion of Digital Panoramic Radiography in Posterior Segment,R783
  9. For the \,TP273
  10. The Weakest Pre-Predicate Generator Design and Implementation Based PAR,TP311.11
  11. Proximity exposure graphics copied computer-aided analysis and process optimization,TN305.7
  12. Integrated Enterprise Modeling Correctness Evaluation,TP311.52
  13. On Developmental Pattern of English Monophthongs by Chinese ESL Learners,H319
  14. A Study and Survey on the Slogan of Car,H15
  15. The Accuracy Study of Metrics Data in Software Quality Management,TP311.52
  16. Reserch on System of No-Scanning Imaging Ladar,TN958.98
  17. Research on an Adaptive Macroblock Encoding and Rate Control Algorithm Based on H.264/AVC,TN919.81
  18. Bit Allocation and Rate Control Technologies for Multi-view Video Coding,TN919.81
  19. Research and Improvement on Rate Control Algorithm and Rate Distortion Optimization Model for H.264,TN919.81
  20. The Panoramic Image Fusion of the Inner Wall,TP391.41
  21. Distortion Invariant Target Recognition Technology,TP391.41

CLC: > Industrial Technology > Metallurgy and Metal Craft > Tolerance techniques to measure and mechanical measuring instruments > Thread measuring its meter
© 2012 www.DissertationTopic.Net  Mobile