Dissertation > Excellent graduate degree dissertation topics show

Study on Quadruple Hydrogen-Bonding Recognition Polyurethane

Author: GongYuanYuan
Tutor: WangXinLing；ZhengZhen
School: Shanghai Jiaotong University
Course: Materials Science
Keywords: quadruple hydrogen bond supramolecular chemistry polyurethane mechanical properties electrospinning
CLC: TQ323.8
Type: Master's thesis
Year: 2011
Downloads: 39
Quote: 0
Read: Download Dissertation

Abstract


In recent years, the hydrogen bonding recognition supramolecular materials based on UPy （2-ureido-4[1H]-pyrimidone） unit have gained much attention. The UPy units could dimerize through quadruple hydrogen bonding recognition. The formation of the dimer could increase the apparent molecular weight. Apart from this, the properties of the supramolecular could be changed significantly. If several UPy units were introduced to one molecular chain, a supramolecular network could be formed in which UPy dimers acted as physical crosslinkers. Compared with the traditional chemical crosslinked network, this supramolecular network was reversible. While maintaining the elasticity, such polymers also enhanced its mechanical properties and improved its processability. For these reasons, the applications of the materials were widely enlarged.In this paper, a UPy functional group-containing diol was synthesized referring to former work. And then the UPy-containing polyurethane was achieved with PEG acting as the soft segment, UPy-containing diol and HDI as the hard segment. Its properties was studied through comparison with UPy-free polyurethanes. Viscosity test results showed that the UPy group can only associate in nonpolar solvent, such as CHCl3. The association greatly improved the intrinsic viscosity. The tensile property tests indicated the improvement of tensile strength for the quadruple hydrogen bonding interaction. The glass transition temperature was increased due to the decline of the chain flexibility. The introduction of the ureido sacrificed the thermostability of polyurethanes. But the initial decomposing temperature was still above 250oC, which was acceptable. The crystallization of PEG was restricted by the interaction of quadruple hydrogen bonding.A series of PEG with different molecular weight was adopted to synthesize polyurethane samples with different content of UPy. The content and density of UPy had much influence on the properties of polyurethanes. The lower PEG molecular weight, the greater the density of UPy, the more remarkable the influence. The TEM images shows that, as the length of the soft segment increased, the morphology changes from fibrous to spherical.Finally, we selected the UPy-containing polyurethane with PEG10000 as the soft segment to study on its electrospinning properties. We mainly studied two factors: the ratio of solvent and the concentration. The results indicated the ratio of DMF/CHCl3=1/1 was the best one. The applicable concentration of the spinning solution was 8%12%.

Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  2. The Preparation and Research of Magnetically Separable TiO2 Photocatalyst Nanofibers,TB383.1
  3. The Study of Preparation and Photocatalytic Activity of TiO2 by Electrospinning,O614.411
  4. Synthesis and Biocompatibility of different types of hydrophilic surface - modified polyurethane,R318.08
  5. Preparation and Characterization of Polymer Micro/Nano Fibers by Laser Melt Electrospinning,TQ340.64
  6. Prototype Development of Intimate Apparel Mannequin,TS941.2
  7. PVA / Polystyrene Composite Nanofibers Preparation and Characterization,TQ340.1
  8. Research on Mechanical Properties of Concrete with Multi-Component Admixture,TU528
  9. Structure and Characterization of Room Temperature Self-crosslinked Acrylonitrile-butadiene-styrene,TQ325.2
  10. Preparation and Characterization of Carbon Nanofibers Containing Fe,TQ342.742
  11. Preraration and Properties of Carbon Nanofibers and Their Composites,TB383.1
  12. Preparation of Nanofibers Modified Electrode and Its Electrocatalytic Properties,O646
  13. Preparation and Application of Biocompatible Nanocomposites,TB383.1
  14. Preparation of Metal Oxides Electrode by Eelectrospining and Studies on Electrochemical Supercapactors,TM53
  15. A Study on Preparation Electrospinning Orientation Nanofibers and Nanofiber Bundles,TQ340.6
  16. Preparation and Optical Properties of PS/QDs Nanofibers and Tungsten Oxide Nanofibers,TB383.1
  17. The Structure and Properties of Electrospun Silk Fibroin Poly(butylene Succinate) Tubular Scaffold,R318.08
  18. Synthesis and Property Study on Polyurethane Reinforcing Agent Used for Coal Mine Safety Materials,TD7
  19. Electrospinning Bombyx Mori Silk and Produce Reinforced Composite Nanofiber,TB383.1
  20. Study on Blending Modification of Biodegrable Plastics PBS,TQ323.4
  21. Study on Modification of Waterborne Polyurethane,TQ323.8

CLC: > Industrial Technology > Chemical Industry > Synthetic resins and plastics industry > Polycondensation resin and plastic > Polyurethane (poly carbamate ) and plastic
© 2012 www.DissertationTopic.Net  Mobile