Dissertation > Excellent graduate degree dissertation topics show

Study on Preparation and Properties of RFID Conductive Ink

Author: QinJun
Tutor: DuYongGuo
School: National University of Defense Science and Technology
Course: Materials Science and Engineering
Keywords: RFID tag RFID conductive ink silver flake 1D silver wires rheologic behavior
CLC: TP391.44
Type: Master's thesis
Year: 2011
Downloads: 275
Quote: 1
Read: Download Dissertation

Abstract


With the rapid development of Internet of Things and RFID technology, the demand for RFID electronic label is growing and its application form extends with each passing day. As a key component of the electronic label, most of RFID electronic label antenna is prepared through traditional etching process. However, a large number of metal waste is produced in etching processing and may pollute the environment. Conductive ink printing method in RFID electronic tag preparation has the advantages of low cost, high efficiency, no pollution etc, which is the future development direction of RFID tag antenna manufacturing technology. The paper has chose screen printable RFID conductive ink as the object of study. A systematic study of RFID conductive ink was developed from three aspects: conductive phase silver powder preparation and application in conductive ink, the design of binder system in conductive ink and its performance, research on rheology of conductive ink.Different sheet sizes of flake silver powder were prepared by mechanically ball milling process. The effect of silver particle size on ball milling process and the properties of flake silver powder was studied. Silver flake diameter was increasing with milling time firstly. However, when the flaking process reached the limit, sheet size of flake silver powder decreased. The smaller sizes of silver particles, the shorter time sheet size reaching the limit and the more irregular flake silver powder with the same balling process. A steel-assisted polyol method has been proposed for high-concentration and large-scale preparation of screen printable 1D silver wires with low aspect ratios(10~20). Conductive properties, viscosity and solvent release property of conductive ink with different types of silver powder were investigated.A thermoset-thermoplastic resin blend was designed. Epoxy resin was used as the thermosetting resin and PVB(Polyvinyl butyral) was used as the thermoplastic resin. The curing process was 120℃in blast drying box for 30min according to the curing behavior of epoxy binder system and chosed solvents. The effect of silver content, binder resin components in conductive ink on volume resistivity, adhesion, printing and anti-bending performance of cured films were investigated. The higher silver content of conductive ink, the better conductive property and the bigger brittleness of cured film; The higher PVB content of Binder system, the better bending resistant performance and stronger adhesive force of cued membrane. In addition, conductive ink with higher PVP content had higher viscosity and more viscous components, so the pattern printed had the irregular edges and appeared many burrs.Shear-thinning characteristics, dynamic yield stress, thixotropy, thixotropic structure recovery rate and dynamic viscoelastic properties were measured using a rheometer. Rheological properties and anti-settling performance of conductive ink with different silver content, different silver types and thixotropic agent content were studied. Yield stress, zero shear viscosity and infinite shear viscosity of conductive ink obtained by curve fitting of viscosity measurable using Cross and Herschel-Bulkley rheological model were proved right and would play great important roles in conductive formulation design.

Related Dissertations

  1. Rfid-based Information Management Platform for the Aviation Food Logistics,TP311.52
  2. Hong Kong Small and Medium Enterprises Development Research Logistics Services,F259.23
  3. The Investigation and Application of RFID Technology Based on Split Ring Resonator,TP391.44
  4. Structure, Unique Rheologic and Assembly Properties of Multi-walled Carbon Nanotube Fluids,TB383.1
  5. Optimized Research on Print Quality of RFID Label Antenna Based on Neural Network Model,TS896
  6. Research and Implementation of Service Tasks-Oriented Support Technologies in Intelligent Space,TP242
  7. Microelectronic assembly of high-performance silver conductive adhesive,TB383.3
  8. Research and Design of RFID Tag Antenna Using FDTD,TP391.44
  9. The Optimization Design and Realization of EEPROM Used for RFID Tag IC,TP391.44
  10. High security and low cost RFID tags Baseband System Design,TP391.44
  11. Low melting point alloy doped with silver Conductive Adhesive,TB383.3
  12. Research and Design of Frequency Tunable RFID Antenna,TP391.44
  13. Analysis and Design of FICT Container Management Information System,U695.22
  14. Research of the Collision Problem in RFID System,TP391.44
  15. Reserch on the Optimization Method of RFID Tag Antenna Based on Genetic Algorithm and Particle Swarm Optimization and Artificial Neural Network,TN820
  16. Design and Research of Dispensing and Chip Placing Module in RFID Tags Packaging Equipment,TP391.44
  17. Depending on the application the RFID tag antenna,TN820
  18. Based on EPC Class-1 Generation-2 UHF RFID tag chip standard digital circuit design,TP391.44
  19. Design of CMOS Temperature Sensor for RFID Tag,TP212.11
  20. Study on the Radio Frequency Identification Technology for the Internet of Things Based on EPC,TP391.44
  21. Low-power chip technology and its applications in RFID,TP391.44

CLC: > Industrial Technology > Automation technology,computer technology > Computing technology,computer technology > Computer applications > Information processing (information processing) > Pattern Recognition and devices > Optical pattern recognition devices
© 2012 www.DissertationTopic.Net  Mobile