Dissertation > Excellent graduate degree dissertation topics show
Development of Static Eliminator in Printing Industry
Author: PengBo
Tutor: LiuZhongYang
School: Dalian University of Technology
Course: Theory and New
Keywords: Electrostatic Static Eliminator Transformer printing
CLC: TS803
Type: Master's thesis
Year: 2009
Downloads: 47
Quote: 0
Read: Download Dissertation
Abstract
|
In printing industry,Product quality and safety are affected by static.This paper compared the performance of various types of transformers in full based on the research to solve this problem.Select Voltage-type electrostatic eliminator electrostatic eliminator to be the design program by combination of practical issues.The research has been done as follows:(1) A new type of discharge electrodes of protection of housing made of insulating material using was developed.Twenty pin 8mm needle sewing were chosen as the discharge.Spacing between is 10mm.Total length of discharge was 30cm.(2) A new static eliminator of transformers of which the efficiency is 87.6%is developed. The ways to improve the efficiency of transformer was research in theory.Efficiency is largest when the variable loss is same with the constant loss.First wind a transformer before inquiry process in the system.Amendments to the core of the magnetic flux density.So that the calculation of coil turns can be more precise.The performance test of Transformer was developed.The parameters of the transformer are in line with the design of requirements.(3) The safety and reliability of static eliminator are explored.The Current-limiting resistor was made to be series connection in circuit to take the way to prevent the spark discharge.Finally,epoxy resin with vacuum casting to the transformer and current limiting resistor with sealed.All above complete the work of the task of subject successful.It has contributed to manufacturing technology of the offset press.At the same time,the text in the study also have significant reference value for eliminate static electricity of other industries.
|
Related Dissertations
- Study on Hermetic EDGE Sealing of Anodic Bonding for Vacuum Glazing,TQ171.1
- Fabrication of Membrane Electrode Assembly for PEMFC,TM911.4
- The Equivalent Circuit Model of Radial Vibration Mode Piezoelectric Transformer and Its Application,TM406
- Study on the Mechanism of Partial Discharge Emitting Ultrasonic Wave and Propagation Property Within Power Transformers,TM855
- Predicting Model of Coal Fired Fly Ash Resistivity,X701.2
- Fibroin microspheres and their use as cell carriers in study,R318.08
- Research on the Application of Lean Production in Company M in SIP,F273
- GPRS-based transformer fault diagnosis system,TM407
- The Design and Implementation of Online Photo Album Printing System,TP311.52
- Design and Implementation of petrochemical enterprises substation operation system,TP311.52
- Study on Fabrication Technology of Metal Oxide Coplanar Gas Sensor,TP212
- The Modification of Attapulgite Clay and the Application in Dyeing and Printing Wastewater Decoloring,X791
- The Study on the Method of Structural Dynamic Modeling and Analysis of Wind Power Transformers,TM41
- Fabrication, Characterization and Biocompatibility of Liquid-Electrospinning Novel Three-Dimensional Scaffolds,R318.08
- Laser printing equipment transfer project risk management,F416.6
- Oil inverted current transformer main insulation field analysis and optimization,TM452.3
- Rogowski -type current transformer , high-performance design and research,TM452
- Based on Particle Swarm main power transformer insulation design,TM41
- Variable Data Printing File Analyzing and Screening Technology Base on PPML,TS805.4
- Space Charge Properties of Two Kinds of Oil-paper Under DC Electric Field During the Process of Thermal Aging,TM215.6
- Study on Micro Wedm Using Electrostatic Induction Feeding Method,TG484
CLC: > Industrial Technology > Light industry,handicrafts > Printing Industry > General issues > Machinery and equipment
© 2012 www.DissertationTopic.Net Mobile
|