Dissertation > Excellent graduate degree dissertation topics show

Research on the Factors Which Affect the Structure and Performance of Natural Color Silk

Author: WangShaoHua
Tutor: WangXiangRong
School: Suzhou University
Course: Textile Chemistry and Dyeing and Finishing Engineering
Keywords: natural color silk structure mechanical property analysis
CLC: TS141
Type: Master's thesis
Year: 2009
Downloads: 66
Quote: 1
Read: Download Dissertation

Abstract


Natural color silk is a kind of silk which use the natural color cocoon genes chosen from all over the world, the color of it is stable. It can not only avoid the danger brought by the chemical dyes, but also can avoid the pollution produced by the dyeing factory, so it is a new kind of silk which is worthy to be exploited.Infrared spectroscopy, X-ray diffraction, amino acid analysis, scanning electron microscope, thermogravimetric analysis、mechanical properties test are used to compare the structure, appearance and property between the natural color silk and the ordinary one. The results show that the natural color silk fiber is thinner than the ordinary silk, the shapes of section and verticality are almost the same as the ordinary silk, the crystallinity of natural color silk is 44.4%, it is lower than the ordinary one; the natural color silk is composed of GLY, ALA, SER and TYR, it is the same as the ordinary one; the percentage ratio of this four amino acids is 86.87%. Amide I, amide II, amide III and amide V exist in natural color silk fibroin molecules; the natural color silk has the structure of random coil,β-sheet andα-helix. The average breaking tenacity of the natural color silk is 3.45cN/ dtex, the Young’s Modulus is 76.7 cN/dtex, Breaking Elongation is 17.5%.The influence of chemical agent and thermal to the natural color silk are studied in this article. The results show that the conformation of the treated natural color silk fiber is stillβ- fibroin, withβ-sheet andα-helix structure.The influence of acid is relatively small; the breaking tenacity and breaking alongation of natural color silk declines clearly after Sodium hydroxide treatment; the crystallinity decreases significantly; the Young’s Modulus of natural color silk declines a little; the breaking tenacity and breaking alongation of natural color silk treated by oxidants and reducing agent remarkably declines. There are someβ-sheet changed into random coil after treated by metal salt, oxidants and reducing agent. The breaking tenacity and breaking alongation of natural color silk decreases significantly by high temperature and long time treating ,so is the crystallinity.

Related Dissertations

  1. Research on Developmental Strategies of Commercial Fitness Clubs in Nanning Based on SWOT Analysis,G80-05
  2. Synthesis, Structure and Properties of PBO/SWNT Composite Fibres,TQ340.64
  3. Quantitative Analysis of Pyrolysis Component of Typical Low Volatile Coal of Chinese,TQ530.2
  4. Hydrothermal Synthesis of Oxide Hollow Spheres,TB383.4
  5. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  6. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  7. Investigations of Structure and Glass Forming Abilty of Amorphous Alloys,TG139.8
  8. Technology of Filling Clearance and Optimizing the Bonds during Ultrasonic Brazing,TG454
  9. Image Analysis System of Metal Transfer of Gas Metal Arc Welding,TG444
  10. EDM Electrode Wear Mechanism and Control Research,TG661
  11. The Effect of Composite Additive on the SNCR,X701
  12. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  13. Tooth Profile Modeling and Machining Error Analysis of the Face Gear,TH132.41
  14. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  15. Error Analysis and Measurement Method Design for the Hemispherical Resonator Gyro,V241.5
  16. Pattern Classification of Combustion Modes in Scramjet,V235
  17. Temperature Drift Modeling and Compensation of Fiber-Optic Gyroscopes,V241.5
  18. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  19. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  20. Key Technologies of Dam-break Life Loss Risk Assessment Research,TV122.4
  21. The Research on the Architectural Adumbral Method of Building,TU226

CLC: > Industrial Technology > Light industry,handicrafts > Textile industry,dyeing and finishing industry > Silk textile > Basic science
© 2012 www.DissertationTopic.Net  Mobile