Dissertation > Excellent graduate degree dissertation topics show

Numerical Simulation of Dynamic Recrystallization Behavior of GH4169 Alloy during Inertia Friction Welding Process

Author: ZhuDaXi
Tutor: ZhangLiWen
School: Dalian University of Technology
Course: Materials Physical Chemistry,
Keywords: inertia friction welding GH4169 alloy dynamic recrystallization numerical simulation FEM
CLC: TG401
Type: Master's thesis
Year: 2009
Downloads: 135
Quote: 1
Read: Download Dissertation

Abstract


As one of the most advanced solid phase welding technologies,inertia friction welding has been widely used for the connection of aero-engine turbine rotor Parts.Recently,with the development of computer technique and finite element method,the method of numerical simulation based on FEM theory becomes an important tool for the research of inertia friction welding.In the process of inertia friction welding,dynamic reerystallization occurred obviously in the welding area and had a great effect on the ability of welded joints.In this paper,the numerical method was adapted to investigate the dynamic recrystallization.It provides a foundation for quantitatively predicting the dynamic recrystallizaition occurred in the process of inertia friction welding,and plays an important role on optimizing the welding parameters,improving the quality of welded joints and advancing the inertia friction welding technique.In this paper,a 2D axisymmetric thermal-mechanical coupled FE model for inertia friction welding of GH4169 alloy was established using FE software MSC.MARC.The rezone option was presented to improve the precision of calculation in the model.Considering the temperature change during the inertia friction welding process,the addictive rule was introduced to adjust the mathematic model for dynamic recrystallization of GH4169 alloy established by Y.S.Na.By second-development of MSC.MARC,the mathematical model for dynamic recrystallization was combined with the FE model,the routine for data-transmitting that used to cancelling the effect of rezone option was edited.The combined FE model was used to simulate the inertia friction welding process of GH4169 alloy rings.The temperature field,strain/stress field,distribution of dynamic recrystallization fraction and average grain size in the process of inertia friction welding were obtained and analyzed.To verify the FE models,the calculated shape of the welded joints,the distribution of dynamic recrystallization area and the grain size of the welding area were compared to the measured ones.It was concluded that they were in good agreement respectively.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Analysis of Flexspline Stress and Tooth Wear in Harmonic Gear Drive,TH132.43
  6. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  7. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  8. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  9. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  10. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  11. Numerical Simulation of Biomass Direct Reburning,TK16
  12. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  13. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  14. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  15. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  16. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  17. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  18. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  19. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  20. Marine Boiler Superheater Tubes Expansion Port Stress and Strain Analysis,TQ051.5
  21. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3

CLC: > Industrial Technology > Metallurgy and Metal Craft > Welding, metal cutting and metal bonding > Welding general issues > Welding Metallurgy problems
© 2012 www.DissertationTopic.Net  Mobile