Dissertation > Excellent graduate degree dissertation topics show

Simulation and control of wind turbine output characteristics of wind power generation system

Author: LiuXiaoGuang
Tutor: YuanMingTing
School: Qingdao University
Course: Control Theory and Control Engineering
Keywords: wind turbine imitation wind model direct torque control torque speed MPPT
CLC: TM614
Type: Master's thesis
Year: 2009
Downloads: 419
Quote: 5
Read: Download Dissertation

Abstract


Wind power,as a renewable energy,is an important alternative energy resource and plays an important role in increasing energy supply,improving energy structure,ensuring energy security and protecting environment.It is of great importance to all countries in the world and a key industry of new energy development in China.Since there are many adverse factors with the field test,indoor simulation for Wind power generation system becomes one of most effective means.Wind power generation system converts kinetic energy of wind into power output by using a wind turbine blade;This paper simulates the speed and torque characteristics of wind turbine which is important to provide experimental condition for improving the utilization of the wind energy and the follow-up transition of mechanical energy to electrical.This paper proposes a method to imitate the actual output characteristics of wind turbine by using direct torque controlling asynchronous motor.By using this simulator to drive a generator,we can make wind power technology research.After analyzing the advantages and disadvantages of a variety of wind models,a model of combined wind was established.Compared the simulating wind speed curves with the actual wind speed dates,a conclusion could be drawn that the wind model had its accuracy and feasibility. Wind turbine aerodynamic characteristic was analyzed and wind turbine model was established by which we could achieve the corresponding rotational speed,power and torque when giving a certain wind speed;Based on the detail analyzing of asynchronous motor direct torque control,wind turbine output characteristic simulating system was designed using established wind speed model and wind turbine model;Induction motor stator flux model was optimized,and a method of torque ripple minimization was proposed.The time of switching state vector was optimized using duty ratio control technique,which greatly minimized the torque ripple.Analyzing the most power point tracking theory and proposing a arithmetic of the most power point tracking on the base of traditional MPPT control arithmetic,which make the power varied with the wind speed and maintain a best effectiveness.

Related Dissertations

  1. Model of Cylinder Controlled by On-Off Valve and System of PWM Control,TH138
  2. The Theoretical and Experimental Research on Preload and Supporting Stiffness of a Wire Race Ball Bearing,TH133.331
  3. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  4. Research on Photo-Electric System of Rotating Shaft Radial Runout and Rotary Speed Real-Time Measurement,TH822
  5. Study on the Control System for Automatic Aiming of HWIL Pitching Mechanism,TJ303
  6. Robust Control Research on Automotive Engine Idle-Speed,U464
  7. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  8. Simulation Research on Compound-Structure Permanent-Magnet Synchronous Machine System Used in Hybrid Electric Vehicles,TM341
  9. Well Detection Pump Steady-Speed Driving System of Brushless DC Motor,TM33
  10. The Basic Research of Axial Flux Inductor Type High Temperature Superconducting Motor,TM37
  11. The Development of Electric Control System for Product Line of Cross-Linked Cable,TP273.5
  12. Research on the Synchronous Control Algorithm of a Special Target Simulator,TP273
  13. Design of High-Speed Data Acqusition Board Based on Signal Integrity Analysis,TP274.2
  14. Development of the Digitizer Based on PCI-E Bus,TP274.2
  15. Reaserch on Dynamics for Fast Walking of Biped Robot,TP242.6
  16. Research on the Revenue Distribution of PPP Mode about High-speed Railway Project,F283
  17. Research on Design of Intelligent Testing System of Grain Suspension Velocity,S220.2
  18. Research of DSP-based Real-time Demodulation Method of One-frequency Laser Interferometer,TN911.3
  19. Flow Behavior Description of Two-Phase Flow Based on Image Processing Techniques,TP391.41
  20. To Study the Techniques for Purification of Nature Products by High-speed Counter-current Chromatography(Ⅱ),R284
  21. Eleventh National Games men's Triple Jump Triple Jump Technique kinematic analysis,G823.4

CLC: > Industrial Technology > Electrotechnical > Power generation, power plants > Variety of power generation > Wind power
© 2012 www.DissertationTopic.Net  Mobile