Dissertation > Excellent graduate degree dissertation topics show
Research on Skewed Gas Flow Formed by Using Guiding Plate in Entrance of Electric Field
Author: SunXiJuan
Tutor: HuManYin
School: North China Electric Power University (Hebei)
Course: Environmental Engineering
Keywords: ESP Oblique flow Air distribution Numerical Simulation
CLC: X701.2
Type: Master's thesis
Year: 2008
Downloads: 64
Quote: 0
Read: Download Dissertation
Abstract
|
Air distribution is affected ESP collection efficiency is one of the main factors , currently available research results and practical applications show that the use of oblique flow technology, ESP collection efficiency is higher than the uniform air distribution esp. In this thesis, the intake air distribution inside the smoke deflector plate installed oblique flow is formed by adjusting the deflector mounting angle , spacing, and the number to change the flow pattern , using FLUENT software simulation ESP flow distribution within the three-dimensional oblique . The simulation results show that : In the air distribution plate mounted spoiler different parameters can form helical flow ; in the importing second , three air distribution baffle plate installed the simulation results with experimental conditions basically consistent flow distribution , the deflector plate spacing and the angle of 504mm and 55 ° , respectively , can form a helical flow better ; import third layer only in the air distribution plate mounted spoiler , spoiler pitch and tilt angles of 400mm and 55 °, while at the end of the installation of a uniform electric field at the exit aperture ratio of 50% air distribution plate , exports than imports tobacco smoke chamber centerline tank centerline 2m high , it can form an ideal oblique air flow pattern . In addition, the formation of oblique airflow degree of optimization are also discussed. These are available for the use of oblique airflow design and operation of the ESP to provide reference and basis.
|
Related Dissertations
- Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
- Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
- Numerical Simulation of Biomass Direct Reburning,TK16
- Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
- The Electrostatic Dust Removal System Based on Microcontroller and LabVIEW,X701.2
- Research on the Down-hole Data Sampling and Transmission Method,TE938
- Real-time PCR and RT-PCR analysis of ordinary Enterococcus faecalis esp gene differences,R440
- Three-dimensional reconstruction and cochlear basement modal Numerical Simulation,R764
- Study on the Stress of Distribution in Surrounding Rock and Anti-Rockburst Design in Boundary Coal Stope,TD311
- Experiment and Numerical Simulation Study of Side Holds Distributor Fluidized Bed,TQ051
- In-furnace Temperature Information Included Combustion Optimization of a Utility Boiler,TK227.1
- The Simulation Research of Non-steady Thermal Comfort of Railway Station,TU831
- Simulation Study of Air Distribution in Large Space of Station,TU831
- Integrated Design of Residence & Airflow Distribution System Based on the Principles of Underfloor Air Distribution System,TU831
- Modern architecture bolted and welded steel welding stress and deformation of,TU391
- SHS reaction bonding process research and application,TN405
- Numerical Simulation Research on Optimal Milli-second Delay Time with Many Free Surfaces Hole by Hole Blast,TD235
- The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
- After four empirical studies student learning needs,H319
- Yanan City loess landslide stability,P642.22
- Panji Village landslide stability analysis and control program,P642.22
CLC: > Environmental science, safety science > Processing and comprehensive utilization of waste > General issues > Exhaust gas processing and utilization > Smoke and dust
© 2012 www.DissertationTopic.Net Mobile
|