Dissertation > Excellent graduate degree dissertation topics show

Calculation of the Exhaust Volume of an Underground Garage and Simulation on Pollutant Dispersion Process

Author: ChenJunPing
Tutor: ZhaoLei
School: Xi'an University of Architecture and Technology
Course: Heating,Gas Supply, Ventilation and Air Conditioning Engineering
Keywords: Underground Parking Garage Idle Condition Pollutant Dispersion Characteristics Numerical Simulation
CLC: TU962
Type: Master's thesis
Year: 2009
Downloads: 118
Quote: 0
Read: Download Dissertation

Abstract


In order to ensure the air quality in a garage to meet the hygiene standard as well as to save energy,it is very important to determine a reasonable ventilation rate and to choose a proper air distribution mode of mechanical ventilation system.It is important to acknowledge the dispersion characteristics of exhausted pollutants while cars idling and cold starting process of the car.It may help to use natural ventilation feasibly or to arrange the air inlets and outlets more properly.However,research on the pollutants dispersion characteristics under idling condition of vehicles are far from enough.To this end,how to determine proper ventilation volume and grasp the dispersion characteristics of pollutants while car idling in a garage were studied in this paper.Firstly,five empirical formulas currently used to calculate the ventilation flow rate of an underground garage were compared based on the calculation result of a garage in Xi’an.It reveals that there are significant differences exist between the five results from 5 formulas due to different value of the coefficient adopted in different formula.The result obtained from No.3 formula is more feasible.It has a simple form and the physical meaning of each item is clear.Thus,it is suggested to be used in practical projectThen,a garage in size of 45m×45m×3m was chosen as the computational domain. The transient dispersion process of the exhaust fume of a car idling in the garage was simulated by solving the standardκ-εmodel together with the control equations. Dynamic mesh technology was adopted.Analyses were conducted on the static pressure fields and CO concentration fields around the car moving in an airtight,naturally ventilated or mechanically ventilated garage.Results show that negative pressure zones form on the left and right of car shoulder and the pressure distribution are symmetrical along the center line of the cars,the symmetry axis of symmetry.The exhaust fume of the car disperses to the surrounding environment under the buoyant force and the small discharging momentum.And then the pollutant dispersion processes were also simulated under the cases of two-car parallel and cross idling.It shows that a lower pressure formed in the zone between two vehicles.And the exhaust fumes interfere with each other and several eddies appear in this zone,which makes CO accumulate in this part and the air quality deteriorate.However,it has little impact on dispersion characteristics of CO in the main stream.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Study of Simultaneous Desulfurization and Denitrification with Calcic-Based Absorbent in a Fixed Bed,X701.3
  6. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  7. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  8. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  9. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  10. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  11. Numerical Simulation of Biomass Direct Reburning,TK16
  12. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  13. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  14. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  15. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  16. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  17. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  18. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  19. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  20. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  21. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13

CLC: > Industrial Technology > Building Science > Underground construction > Underground construction equipment > Air-conditioning , heating, ventilation and heating equipment
© 2012 www.DissertationTopic.Net  Mobile