Dissertation > Excellent graduate degree dissertation topics show

Research on Transparent Ethylene-propylene Copolymer Used for Injection Molding

Author: WeiDeShuai
Tutor: ZhangHaiYan
School: Northeast University of Petroleum
Course: Chemical Engineering
Keywords: transparent ethylene-propylene copolymer nucleating agent random copolymer injection molding
CLC: TQ325.14
Type: Master's thesis
Year: 2011
Downloads: 58
Quote: 0
Read: Download Dissertation

Abstract


Because transparent polypropylene behaves fine capability, it has been used for transparent wrapper, iatrical appliance and home appliance.This Research use bench-scale polymerizer to produce random copolymer of ethylene and propylene. The copolymer has better performance than homopolymer. Then append a few of nucleating agent to improve the transparency of the copolymer. The final product satisfy request.The final product has the same performance with the M800E and the M1600E product by Shanghai Petrochemical Company. The melt flow rate(MFR)is about 10g/10min. The haze is under 10%. The impact strength is above 5kJ/m2. The tensile strength is above 35MPa. The breaking elongation is above 700%.

Related Dissertations

  1. Heat Resistant Research of Biodegradable Polylactic Acid Materials,TQ320.7
  2. Polypropylene initial crystal structure of the pressure -induced flow-forming role in regulating,TQ325.14
  3. Synthesis and Characterization of Novel Xanthene-containing Poly (Aryl Ether Ketone)s and Poly (Aryl Ether Sulfone)s,O633
  4. Exploitation of Materials of Polypropylene Pipe Joints for Water-saving Irrigation,TQ325.14
  5. Study on Crystallization and Mechanical Properties of PP/PET Blend,TQ325.14
  6. Study on the Antibacterial, Acid and Alkali Corrosion Polypropylene,TQ325.14
  7. Synthesis and Influence of New Liquid Crystals and Nucleators on Crystallization Behavior of Polypropylene,TQ325.14
  8. The Morphology and Structure of Isotatic Polypropylene Parts Molded by Water-assisted Injection Molding,TQ320.662
  9. The Research of Processing and Molding Polypropylene Isolation Film,TQ325.14
  10. Studies on the Crystallization of Flame Retardant Polyethylene Terephthalate (PET) Engineering Plastic and Formulation Optimization Principles,TQ322.3
  11. The Research of Nucleator and Inoganic Particles Composite Modifying PP,TQ325.14
  12. The Study and Application of Polycarboxylic Acid,O631.3
  13. NPMI-St copolymer synthesis and PA6 with heat-resistant copolymer compatibility,O631.3
  14. Study on Preparing Low Thermal Expansion Glass-ceramic of Li2O-Al2O3-SiO2 System by Sintering Method,TQ171.1
  15. Study on PA66/RCT/rPET/Talcum Blends,TB332
  16. Nucleating agent for PP / POE blends crystallization behavior,TQ325.14
  17. Study on Crystallization Behavior and Mechanism of Poly (L-lactic Acid) by Inclusion Complex of P-tert-Butylcalix (8) Arene/xylene,O631.3
  18. The Application of BP Networks Based on Genetic Simulated Annealing Algorithm for the Prediction,TQ320.662
  19. The Simulation of the Process of Molding and Optimal Design of Mold to B Pillar-underplate,U468.2
  20. Research on the Preparation of Borosilicate Foam Glass and Microcrystalline Foam Glass,TQ171.1

CLC: > Industrial Technology > Chemical Industry > Synthetic resins and plastics industry > Polymer resin and plastic > Polyolefin plastic > Polypropylene
© 2012 www.DissertationTopic.Net  Mobile