Dissertation > Excellent graduate degree dissertation topics show

Study on Injection Molding Process Multiobjective Optimization and Quality Estimation Based on RBF Neural Network

Author: ChenZhe
Tutor: SunBaoShou
School: Ningbo University
Course: Mechanical Manufacturing and Automation
Keywords: Injection molding process parameters multiobjective optimization RBF neural network uniform design
CLC: TQ320.662
Type: Master's thesis
Year: 2011
Downloads: 121
Quote: 0
Read: Download Dissertation

Abstract


The quality of injection-molded plastic parts is affected by many factors, and an inappropriate setting of the process parameters will cause quality defects such as warpage, weld-lines and air-traps, which will impact the appearance and the performance of the parts. This study focused on the impact of processing parameters on the warpage, weld-lines and air-traps of plastic part by uniform design based on CAE simulation. The method of injection molding process optimization by RBF neural network and Genetic Algorithm is studied, and we can get the optimal process parameters that make the value of three defects minimum. Improved RBF neural network is used to research on multiobjective optimization of warpage, weld-lines and air-traps. Three target values are evaluated comprehensively, and we can get the optimal process parameters of the best evaluation. Main missions of this article includes:1. There is only the value of warpage can be read in analytical data of CAE software. The size of air-trap and the length of weld-line present with image form. In order to make the following mathematics modeling easily, source files of air-trap and weld-line in Moldflow are processed by MATLAB.2. An accurate and reliable CAE simulation model is set up. Injection molding process simulation analysis is arranged by uniform experimental design. According to analysis result, regression equations of warpage, weld-line length and air-trap size are established. Regression coefficients are test of significance and analyzed, we can get influences of process parameters to the three defect.3. The multiple uniform design of experiment is applied to arrange sample points, taking melt temperature, mold temperature and packing pressure as inputs and taking warpage, air-traps size and weld-lines length as outputs, RBF neural networks are established. Combination with Genetic Algorithm and global optimization in the networks, we can get the optimal process parameters.4. The related multiobjective optimization and fuzzy mathematics assessment method are studied. Choosing the appropriate membership function and weighting coefficient to improve original RBF neural networks, taking process parameters as inputs and taking values of comprehensive evaluation as outputs, improved RBF neural network is established. It can realize the estimation of quality of plastic parts, and get the optimal process parameters of the best evaluation. 5. An injection mold was designed and processed for real injection molding experiment. The related defects are measured and compared. It can validate reliability and effectiveness the methods of modeling and optimization.

Related Dissertations

  1. The Research between Uniform Culture and Development of Students’ Psychological,G635.5
  2. Analysis of the Injection Molding and Mold Design of the Small Car Plastic Parts,TQ320.662
  3. Injection Process Analysis and Optimized Deign of MP4 Product Based on the Moldflow Software,TQ320.662
  4. Any area on the uniform design and construct,TQ460.1
  5. Study on Risk Identification and Evaluation of Manufacturing Green Products R & D,F205;F224
  6. Optimization Study on Gating System and Molding Process Parameters of Injection Mold Based on Simulation,TQ320.662
  7. Preparation and Properties of Polyamide Conductive Fiber and Its Compound Material,TQ342.1
  8. Injection molding machine induction heating power heating systems research,TM924.5
  9. Design and Implementation of the Process Monitoring and Fault Diagnosis for Injection Molding,TQ320.5
  10. Within the connection developed to detect its mechanical properties of zirconia abutment,R783.6
  11. Study on Hydrogenation and Characterization of Recycle Solvent for High Inertinite Shenhua Direct Coal Liquefaction,TQ529.1
  12. Effect Research of Simulation Modeling of Virtual Injection Molding Machine System,TQ320.52
  13. Research on Formation Factors and Performance of Wear-resistant Coatings for Aluminum,TG174.4
  14. Study on Fiber Laser Welding of Aluminum Alloy with Filler Wire,TG456.7
  15. Research and Realization of Industry Injury Early Warning System Based on Web and Neural Networks,TP311.52
  16. Worsted wool warp sizing in product processing Application Research,TS105.213
  17. Based on virtual manufacturing sheet metal forming simulation technology,TP391.9
  18. Quantum Clonal Multiobjective Evolutionary Algorithms,O413
  19. Based on a sample simulation technology nonferrous metallurgy blending process optimization method,O221.6
  20. Research on Transparent Ethylene-propylene Copolymer Used for Injection Molding,TQ325.14
  21. Study on Optimized Fromnla of Three Nourishing Kidney-Yang Categorized Formnlae by Uniform Design,R289.1

CLC: > Industrial Technology > Chemical Industry > Synthetic resins and plastics industry > General issues > Production process and production technology > Forming > Injection molding
© 2012 www.DissertationTopic.Net  Mobile