Dissertation > Excellent graduate degree dissertation topics show
The Manufacture of Bio-diesel and the Design of Special Equipment
Author: HouGuoFeng
Tutor: MengYongBiao
School: Xinjiang University
Course: Chemical Process Equipment
Keywords: Biodiesel Were prepared Reactor design studies sw6 application ANSYS
CLC: TE667
Type: Master's thesis
Year: 2009
Downloads: 320
Quote: 0
Read: Download Dissertation
Abstract
|
According to China's renewable energy and long-term development planning , in the \Xinjiang third New Energy Co., Ltd. Xinjiang actual situation and crop characteristics Chemistry and Chemical Engineering , Xinjiang University , biodiesel technology research . This project fully utilize the region rich cottonseed oil foot oil bottom as the raw materials , using chemical method transesterification Production basic line , using sodium hydroxide as a catalyst , at a certain temperature, same below methanol ester exchange , the obtained fatty acid methyl ester , thus to reconcile the synthesis of biodiesel with petroleum diesel . The project is mainly to study chemical method of production technology of bio- diesel and industrial production equipment for the local development of biodiesel industrialization to provide effective technical support . Now to make the study of the chemical production of bio-diesel technology , this paper summarizes the biodiesel lab preparation , the study further industrialization of bio-diesel production plant design . Reactor occupies an important position in the whole production process , and standard equipment can not be used due to the special nature of the process , the paper mainly for the reactor 's design work , also carried out the design of the distillation column bottom reboiler sw6 software strength verification . The last application of ANSYS stress analysis reboiler tube plate .
|
Related Dissertations
- Study on the Preparation of Biodiesel from Fried Oil with Supercritical Methanol,TE667
- Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
- The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
- The Biodiesel Production from Wasted Edible Oil by Two Steps Catalyzed by Resin,TE667
- Study on the Preparation of Medical Grade Glycerol from the By-product of Jatropha Biodiesel,TQ223.163
- Preparation of Epichlorohydrin from Crude Glycerol of Biodiesel By-product,TQ223.26
- Biodiesel Production from Waste Oil and Study of Reduction of the Condensation Point,TE667
- Broken walnut shell force testing and virtual prototype design of the main components of walnut sheller,S226.4
- Study on the Lubricity of Rape-seed Biodiesel and Its Blends with Diesel Oil,S232.6
- Study on Preparation of Biodiesel Catalyzed by Solid Base,TE667
- BP network optimization based on genetic algorithm optimization of the biodiesel process,TE667
- Research on a Fire-fighting Shell for Towers,TU892
- Research on Evaluation of Technology and Economy of Biodiesel Based on Life Cycle Assessment,TE667
- Bearing Capacity of Cast-in-place Piles in the Karst Region of Yichun, Jiangxi,U213.1
- Research of a New Integrated Printing, Drying and Sticking Films’ Machine,TS851
- Structure Analysis and Optimization Design for 150 Tons Flat-Top Crane,TH213.3
- The Surrounding Rock Monitoring and Finite Element Simulation of Subway Tunnel,U455.43
- Numerical Simulation Research on Optimal Milli-second Delay Time with Many Free Surfaces Hole by Hole Blast,TD235
- Research of FBAR Temperature Sensor,TP212.11
- The Study on the Influnce of Sub-splits Wire’s AC Corona Characristics under Different Climatic and Environmental Conditions,TM851
- Three-dimensional Thermal Simulation and Structure Design of Phase Change Access Random Memory,TP333.8
CLC: > Industrial Technology > Oil and gas industry > Oil, natural gas processing industry > Synthetic oil > Extraction of oil from other raw materials
© 2012 www.DissertationTopic.Net Mobile
|