Dissertation > Excellent graduate degree dissertation topics show

Research on the Mix Proportion Design and Mechanism of Fiber-reinforced Asphalt Chip Used as Stress Absorbing Layer

Author: LuFei
Tutor: ShenAiQin
School: Chang'an University
Course: Road and Railway Engineering
Keywords: Fiber-reinforced asphalt chip Stress absorbing layer Mix proportion design Composite material Action mechanism Construction technology
CLC: U414
Type: Master's thesis
Year: 2011
Downloads: 116
Quote: 4
Read: Download Dissertation

Abstract


The condition of interlayer disposal in asphalt pavement is directly related to the overall performance of the pavement, especially of the semi-rigid pavement. Good interlayer disposal not only can effectively prevent or reduce pavement disease, but also enhance the integral bearing capacity of the road. Some research have been taken out to study with interlayer disposal of asphalt pavement, and made a number of effective measures for interlayer disposal. But the ideal state of interlayer disposal cannot be reached yet. So this research imported a new chip seal, the Fiber-reinforced Asphalt Chip Seal (FACS), used it as stress absorbing layer in asphalt pavement. Made a deep study of its mix proportion design and perform mechanism to provide a technical support for its extension and application.To study with the FACS, we should consider with the climate, the transportation and construction technology and so on of different places, and then make a pertinent design. On the base of an investigation of the interlayer disease of asphalt pavement and considering with the climate and transportation situation in Shandong province, the research analyzed the effect of contact state between pavement base and surface layer to stress distribution in pavement with finite element software, and studied with the mix design of FACS used as stress absorbing layer according with availability of raw materials in Shandong, designed new experiment methods for mix design of FACS and invented special equipments for these mix design tests. Through a lot of experiments, we tested the effect law of materials composition to pavement performance of FACS, and then proposed a mix design method which is suitable in Shandong province and established a road performance evaluation index system for FACS used as stress absorbing layer.The research made a deeply analysis of the mechanism of the FACS connected with the principle of composite structure in microscopic level for the first time. Using the knowledge of short fiber reinforced composite, the research revealed the bonding mechanism of the interface between fiber and asphalt, and used the concept of "probability of intensity of critical section" for the first time, to study the mechanical properties of FAS in "critical section", and then established a prediction model of "probability of intensity of critical section". Based on the model, it analyzed the cracking resistance of FAS and proposed the formula to predict the cracking resistance of FACS used as stress absorbing layer.With the experience from test road engineering, the research has also summarized a index system composed of shearing test, water seepage test and smoothness test, provides reference for the construction of the FACS used as stress absorbing layer in Shandong province and even in the whole country.

Related Dissertations

  1. Research on the Inteligent System of High Performance Concrete Mix Design in Zhujiang Triangle Area,TU528
  2. Experimental Study on Flexural Behavior of Stone Slabs Strenthened with Forrencent Mortar,TU363
  3. The Preparation, Microstructure and Propertities of the New Type 3D-Meshy SiC/Cu-Fe Composite Material,TB33
  4. Mechanic Analysis of Bridge Reinforcement with Mesh and Steel Fiber Reinforced Concrete and Construction Technology,U445.72
  5. Research on High Performance Architectural Concrete and Technology for Construction,U444
  6. Research on Construction Technology of Exterior Insulation Mortar in GuangDong,TU761.12
  7. Properties on Aramid 1313 Fabric and the Compound Silastic Rubber Composite Material with This Fabric,TB332
  8. The Micro-surfacing Technology in Expressway Maintenance Projects Application,U418.4
  9. The Research on Preparation and Gas Sensitivity of SnO2 /gold Composite Materials,TB33
  10. Research on the Design Method of Asphalt Mixture with Stress Absorbing Layer Based on Road Performance,U414
  11. Study on Application Technology of Large Aperture Corrugated Steel Pipe Culverts,U449.5
  12. Lightweight foam soil mixed flow regime Prevention Research Bump,U414
  13. SiC_p / Cu composite powder injection molding process and properties,TF124.39
  14. The highway roadbed power characteristics and construction technology,U416.1
  15. Study on the Control of Construction Variability of Cement Concrete Pavement,U416.216
  16. Evaluation Methods of Tack Coat and Stress Absorbing Interlayer,U411
  17. Research on Cold Recycling to Old Asphalt Pavement with Lime-flyash,U414
  18. Study on the Deformation Properties of Embankment of Overlapped in the Expressway Widening Project of Guangyuan to Shanchuanjie,U416.12
  19. Study on Construction Quality Control Techniques of Lean Concrete Base for Cold Area,U416.216.3
  20. Study on the Warm Mix Asphalt with Fiber and Construction Technology,U414
  21. Construction Technology Research on Xitaizi Three-Layer Curved Middle Wall Twin-arch Tunnel,U455.4

CLC: > Transportation > Road transport > Road works > Road construction materials
© 2012 www.DissertationTopic.Net  Mobile