Dissertation > Excellent graduate degree dissertation topics show

Study of the Electro-hydraulic Proportional Loading Systems in the Electro-hydraulic Proportional Pressure-flow Control System Laboratory Tab Based on Proportional Valves

Author: ShiYong
Tutor: ZhangZuo
School: Chang'an University
Course: Mechanical and Electronic Engineering
Keywords: electro—hydraulic proportional electro—hydraulic proportional valve loading system mathematical model PID controller simulation
CLC: TH137.9
Type: Master's thesis
Year: 2011
Downloads: 357
Quote: 5
Read: Download Dissertation

Abstract


This paper is available for "the electro-hydraulic proportional pressure-flow control system laboratory tab" in Chang’an University.Under the existing laboratory equipment, we have built a good proportion of electro-hydraulic pump controlled motor system and the electro-hydraulic proportional valve controlled motor system, but how can we put on a load to the motor under the laboratory conditions, and how can we control the applied load, we have done no specific research.This thesis based on actual needs, design and construct the electro-hydraulic proportional loading system.First we determine the way how to put on a load to the motor:use the proportional valve by changing the eventual realization’ side of the outlet pressure of the secondary components. we use the existing components of hydraulic test stand, design and build the electro-hydraulic proportional relief valve loading system and the electro-hydraulic proportional throttle valve loading system, we analyzed the structure of proportion valves who are core components of our systems. Then we analyzed the principles and applies of two systems.The ratio for the designed loading system, we establish their mathematical model, and then we analysis that the quality and the static characteristic of systems can not meet the actual needs, so we proposed a fuzzy-PID control strategy. Subsequently, we use the available information and the MATLAB software to draw the voltage-torque curve of systems, then we use the simulink software, by analyzing the simulation results, we obtained that a fuzzy-PID control strategy is good for electro-hydraulic proportional loading system.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  3. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  4. Study on Springback of High-Strength Steel Stamping,TG386
  5. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  6. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  7. The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
  8. Satellite Attitude Determination Based on Gyro and Star Sensor,V448.2
  9. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  10. Research on Orbital Control Method for Space Rendezvous and Docking,V526
  11. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  12. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  13. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  14. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  15. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  16. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  17. Numerical Simulation of Biomass Direct Reburning,TK16
  18. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  19. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  20. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  21. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23

CLC: > Industrial Technology > Machinery and Instrument Industry > Mechanical parts and gear > Hydraulic transmission > The application of the hydraulic actuators
© 2012 www.DissertationTopic.Net  Mobile