Dissertation > Excellent graduate degree dissertation topics show

Research of Visual Servoing in 4-DOF Robotic Manipulator

Author: CaiChenSheng
Tutor: LuoJing
School: Harbin Institute of Technology
Course: Control Science and Engineering
Keywords: robotic manipulator visual servo motor drive neural network
CLC: TP242.6
Type: Master's thesis
Year: 2008
Downloads: 217
Quote: 0
Read: Download Dissertation

Abstract


On the automatic production process in modern industry, following the enhancement of computer and electronic device, robots application is more and more extensive, the tasks become more and more complex, and requirements of robot become more and more high. In order to observe the environment, most modern robots are equipped with different kinds of sensors, such as cameras(or more generally, visual sensors), sonar sensors, and tactile sensors etc. Although certain applications may require the use of particular sensors, we note that vision-based sensors provide a very powerful and versatile mechanism for sensing in general-purpose applications. A plausible research direction, therefore, is to utilize visual feedback loop control method in robot control.Visual servo of robot which is a complex non-linear control, is a complicated domain that is about image processing, computer vision, kinematics, dynamics, control theory and real-time calculation. This thesis designs a 4-DOF visual servoing robotic manipulator system of eye-in-hand model. The aim of experiment is to insert the axis to the hole. This thesis presents an image-based visual servoing control method. The method skips the complex calculation of transferring image features to robot pose, and hence gets the joint control signal directly from the information of the image plane.Robotic manipulator system is composed by joint servoing system and visual servoing system in this thesis. Joint servoing system is realized in host control computer while visual servoing system in image processing computer. A circuit board is designed to drive and control DC servo motor. The circuit board contains PWM variable-speed, limitation protecting, signal detecting and processing circuit etc. A real-time simulation system based RTW toolbox is designed by using PCI1711 card, and joint model is built. Dual-loop control of velocity and position is adopted as servo controller of joint. Image acquisition, image pre-processing and feature extracting are realized by image processing toolbox in Matlab. Visual servo controller is designed by neural learning method. This method skips the complex calculating and singularity problem in solving image Jacobian matrix. The non-linear relation between image feature error and joint angle error is learned by two neural network of far and near distance. Samples are collected and networks are off time trained in the thesis. Serial port communication program is produced to realize the intergrated test between host control computer and image processing computer, and aim of experiment is achieved. Accuracy of intergrated test is given by the terminate errors between image real features and expecting ones.

Related Dissertations

  1. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  2. Research on Feature Extraction and Classification of Tongue Shape and Tooth-Marked Tongue in TCM Tongue Diagnosis,TP391.41
  3. Study on Virtual Detector of Infrared Hyper-Spectral Image,TP391.41
  4. The Application of Fuzzy Control and Neural Network in Planar Double Inverted Pendulum,TP273.4
  5. Research on Visual Servo System of Mechanical ARM,TP242.6
  6. Research on Control of the Four-Rotor VTOL Helicopter,TP273
  7. Design of Weapon Detection Device Control System,TP183
  8. Municipal tourism land use planning environmental impact assessment,X820.3
  9. Research on the Inteligent System of High Performance Concrete Mix Design in Zhujiang Triangle Area,TU528
  10. Study on Taste Characteristic of Taste Peptide Enzymatic Production from Oyster Base on A Neural Network Method,TS254.4
  11. Smart Control Research in Paddy Drying Based on BP Neural Network,S226.6
  12. BP network optimization based on genetic algorithm optimization of the biodiesel process,TE667
  13. Fire Fighting System Research for the Offshore Platform,U698.4
  14. The Research on Evaluation of Living Status Systems of Expressway Relocated People,D523
  15. Research on Inspection Technology of Dehydrated Garlic Slice Based on Computer Vision,TP391.41
  16. Research and Application of Safety Assessment Method Based on Neural Network,X937
  17. The Design of the Coal Mine’s Safety Evaluation System Based on Wavelet Neural Network,TD79
  18. Study of Gray Neural Network Model of Enterprise’s Safety Devotion,X913.4
  19. Research of VRLA Battery On-line Montoring and Contorl System,TP277
  20. The Identification of Fault Type in Transmission Lines Based on Neural Network,TP183

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Robotics > Robot > Intelligent robots
© 2012 www.DissertationTopic.Net  Mobile