Dissertation > Excellent graduate degree dissertation topics show

Investigations of Structure and Glass Forming Abilty of Amorphous Alloys

Author: QuDongDong
Tutor: ShenJun
School: Harbin Institute of Technology
Course: Materials Processing Engineering
Keywords: amorphous alloys glass forming ability structure synchrotron radiation high energy X-ray diffraction
CLC: TG139.8
Type: Master's thesis
Year: 2008
Downloads: 102
Quote: 0
Read: Download Dissertation


The glass forming ability of Al92-xCe8Fex(x=16) ternary amorphous alloys are investigated in this dissertation combined with the concept of metallurgy. The amorphous structure of Zr53Cu18.7Ni12Al16.3, Zr51.9Cu23.3Ni10.5Al14.3 and Zr50.7Cu28Ni9Al12.3 are studied by using synchrotron radiation high energy X-ray diffraction (HRXRD) and the efficient close packing model proposed by D.B. Miracle.The ribbons of the six Al92-xCe8Fex(x=16) ternary alloys all exhibit amorphous natures when the thickness is 3050μm. A pre-peak at about 17°of 2θon the conventional X-ray diffraction (XRD) pattern implies the medium range order in each alloy. Moreover, in the XRD pattern of Al86Ce8Fe6, the diffuse halo splits into two subtle sub-peaks which indicate different correlations in this alloy. When the thickness increases to 5070μm, crystalline phases appear in the amorphous matrix. Among these crystallites, the majority are silicates and oxides which are attributed to the inappropriate processing. Besides these, there still exist some competing crystalline phases such as Fe2Al5 and Al13Fe4.Differential thermal analyzer (DTA) curve for each of the six Al92-xCe8Fex(x=16) ternary alloys displays only one fusion peak which demonstrates the six alloys all exist near the eutectic. Gibbs free energy difference ?G between supercooled liquid and crystalline phase are calculated according to the formula by Battezzati and Garrone. It appears that in the six alloys ?G decreases with increasing the Fe component at the same temperature. However, the differences among the six alloys are relatively small.Reduced pair distribution functions (PDFs), G(r), for Zr53Cu18.7Ni12Al16.3, Zr51.9Cu23.3Ni10.5Al14.3 and Zr50.7Cu28Ni9Al12.3, obtained by HRXRD are very similar. The first peak for each of the three alloys splits into two sub-peaks. It is interesting that the two sub-peaks for the three alloys evolve in different trends. Atomic weight factor and bond length for each atomic pairs in this Zr-Cu-Ni-Al imply that, on the PDF curve the former sub-peak is mainly attributed by Al-Cu atomic pair, but the latter one is attributed by Zr-Zr pair. The increasing pairs of Al-Cu and decreasing pairs Zr-Zr are corresponding to the evolution of the former and latter sub-peaks respectively.Based on the efficient close packing model proposed by D.B. Miracle, the structures for the three Zr53Cu18.7Ni12Al16.3, Zr51.9Cu23.3Ni10.5Al14.3 and Zr50.7Cu28Ni9Al12.3 alloys are constructed. We consider the substitution of small atoms Cu for large atoms Zr in this alloy Zr50.7Cu28Ni9Al12.3 stabilize the efficient close packing structure, which further improve the glass forming ability of this alloy.

Related Dissertations

  1. Synthesis, Structure and Properties of PBO/SWNT Composite Fibres,TQ340.64
  2. Hydrothermal Synthesis of Oxide Hollow Spheres,TB383.4
  3. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  4. Technology of Filling Clearance and Optimizing the Bonds during Ultrasonic Brazing,TG454
  5. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  6. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  7. The Study on Structural Calculation and Analysis Method of Lattice-type Crane with Variable Cross-section Boom,TH21
  8. Based on Nonliner Finite Element Analysis of the Infilled Wall Frame Structure,TU323.5
  9. Influence of over Fired Air on Gas-Solid Flows in a W-Shaped Flame Boiler,TK229
  10. Simulation Research on Compound-Structure Permanent-Magnet Synchronous Machine System Used in Hybrid Electric Vehicles,TM341
  11. Research on an Axial/Radial-Axial Flux Compound-Structure Permanent-Magnet Synchronous Machine Used for Hybrid Electric Vehicle,TM341
  12. Hong'an dialect syntax research,H146
  13. Adjust the structure of higher education in Yunnan Strategy Study,G649.2
  14. Research on Stability of Hierarchical Sattellite Network,TN927.23
  15. Research on Autamatic Music Structrue Analysis,TN912.3
  16. Research and Design of High Layer Protocol in DMR Trunking System,TN929.52
  17. Research on Structure Transition Technology for SMT,TP391.2
  18. Research on Attitude Control Law of Endo-Atmospheric Missile,TJ765.23
  19. Study on Nonlinear Variable Structure Guidance Law,TJ765
  20. Sliding Mode Variable Tructure Control for Separating-Mirror System and Inhibit Chattering,TP273

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > The alloy learn with a variety of properties of alloys > Other special nature of the alloy > Amorphous alloy
© 2012 www.DissertationTopic.Net  Mobile