Dissertation > Excellent graduate degree dissertation topics show

The Modular Design of Vertical Mixers’ Control System

Author: YuXueYing
Tutor: LiXiWen
School: Huazhong University of Science and Technology
Course: Mechanical and Electronic Engineering
Keywords: Modular Design Control System Mixer
CLC: TP273
Type: Master's thesis
Year: 2008
Downloads: 111
Quote: 1
Read: Download Dissertation

Abstract


This thesis researched into the modular design of the vertical mixers’control system to improve the design efficiency, shorten the cycle of designing and manufacturing, and reduce the total cost.Firstly, this thesis introduced the common concept of modularity and the correlative theories and methods of modular design, which the control system design based on. With lucubrating and synthesizing many productions, an integrated method of modular design with four phases was proposed, as the steps of each phase and the key technologies ware introduced in detail. In the end, the emphases and difficulties ware discussed.Secondly, basing on analyzing the characteristic of the vertical mixers’producing process and its special structure, the characteristic of components which constitute mixers’control system and its main functions was studied, which prepared for the modular design of vertical mixers’control system.Finally, with the guides of an integrated modular design theory and in terms of the specific of vertical mixers’control system, the specific modular design method of the vertical mixers’control system was proposed. In which the control system appropriateness to modularity was analyzed and its degree of modularity was evaluated, then the modularity strategies and the specific method of design ware identified. After that, the black box’s model of each part of the mixer’s control system was built, the hardware design was finished, and the control system’s hierarchical diagram was drawn. At last, the key control programs of PLC ware programmed, and the result of designing was analyzed and evaluated.Additionally, the methods of the vertical mixers’control system modular design researched in this thesis had applied in the design and manufacture of some small scale of vertical mixer and acquired good effect, which passed the factory’s check and accept successfully. It indicated that the method was scientific and feasible, added the theories and methods of modular design.

Related Dissertations

  1. Design and Fault Diagnosis of the Coarse Pointing Control System in Satellite Laser Communication,V443.1
  2. Study of Automobile Ignition Coil Testing System Based on Standard LAH032.905,U472.9
  3. The Inductive Load Based Vehicle Body Network Control System,U463.6
  4. Research of Predictive Control in Water Treatment Plant Based on Neuron Network,TP273.1
  5. Infrared Imaging Target Simulation Resistance Array Control System Development,TJ765.4
  6. Research on Attitude Control Law of Endo-Atmospheric Missile,TJ765.23
  7. Research on the Control and Remedy of Nanopositioning Stage Drived by Piezo Material Lead Zirconate Titanate,TP273
  8. Research and Design of One Kind of Paper’s QCS That Based on Embedded System,TP368.1
  9. Control System of Rotary Drying for Flake Agricultural Materials,S226.6
  10. M Petrochemical Company CCR unit implementation and management of,F426.72
  11. Sewage treatment equipment design and application of automated operation,TP273
  12. Design and Research of Display of LED Contral System Based on GPRS,TN873
  13. Application and Research of Dynamic Configurable WSN Universal Measure and Control System,TN929.5
  14. Control System Research for a Nano-Material Mixer,TP273.5
  15. The Research of Pledge Supervision Risk Control in Inventory Financing,F259.27
  16. Chinese and Uighur Group Financial Control,F406.72
  17. ATV vehicle weapon control system,TP273
  18. Brushless DC Motor and Control System,TM33
  19. The Optimization Design and Research to Wet Coal Dryer Mechinery Control System,TP273
  20. A Design Study of PLC Elevator Access Control System Based on RFID,TP273.5
  21. Design of Fuzzy PID Controller Based on FPGA,TP273.4

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system
© 2012 www.DissertationTopic.Net  Mobile