Dissertation > Excellent graduate degree dissertation topics show

The Research and Development of Supporting Technologies of Reliable and Real-time Communication in Industrial Wireless Sensor Networks

Author: WuChengWei
Tutor: HuangWenJun
School: Zhejiang University
Course: Detection Technology and Automation
Keywords: industrial wireless sensor network time synchronization pair-wise and broadcast reliable routing link quality estimation
CLC: TP212.9
Type: Master's thesis
Year: 2010
Downloads: 174
Quote: 1
Read: Download Dissertation

Abstract


Industrial wireless technology, as instantiations of wireless sensor network technology in the industrial field application, is a newly emerging wireless communication technology for managing the short-range, low-rate information interactions among devices. It is the use of industrial wireless technology for industrial wireless sensor network, which aimed at realizing industrial on-site data collection and wireless transmission one-stop service. As the factors, such as full-space radiation means of wireless communication, the complexity of the industrial environment and so on, makes reliability and real-time of the network communication can not be guaranteed.The paper takes the problem of high-reliable and real-time communication in industrial wireless sensor network as research object, first develops hardware platform aimed at guaranteeing good communication performance, and then focuses on the technology of time synchronization and reliable routing which are the two critical supporting technologies ensuring reliability and real-time communication from software platform. And the final aim is to provide an excellent platform for high-reliable and real-time communication in network.The hardware platform is designed and implemented. And For improving the hardware communication performance without additional cost, the RF circuit directly determining the communication performance is carried out modeling and simulation using the ADS, and the impact of communication performance resulting from design parameters, such as thickness, substrate properties, and microstrip line and so on is analyzed. In the meanwhile, the test and feedback study of communication performance of manufactured nodes is carried out. The result shows that the performance of physical nodes is consistent with the simulation, and this can help avoiding blindness and enhancing the oriented-result in the design process of RF circuit.Relating to the key supporting technologies ensuring high-reliable and real-time communication in software platform, the algorithms adapting to industrial application of Pair-wise Broadcast Time Synchronization and Multi-path Routing based on Link Quality are designed and implemented according to the understanding of wireless networks in industrial application. PBTS combines pair-wise method with reference broadcast, making use of their respective advantages to achieve network-wide synchronization, and this can not only reduce dependence on specific hardware, but also reduce the synchronization overhead significantly. In the mean while, PBTS proposes message delay update circle factor which could configure algorithm according to actual synchronization requirement, which could increase the algorithm’s flexibility and configurability. MPRLQ combines the steady-state link quality estimation with real-time link quality estimation based on EWMA (exponentially weighed moving average) estimator to provide reliable routing selection in face of the poor link quality in harsh industrial field, in the meanwhile, takes traffic load balancing and high real-time packet transmission requirements into account, which could improve routing reliability.Finally, all algorithms are implemented on the hardware platform. The result of the PBTS indicates that it can achieve a precision of about 20us over a signal hop and less than 50us over 6 hops, respectively, and the stability of clock error is also fine. And the result of MPRLQ reveals that it can be well adaptive to the vibration of the link quality, and well correspond with the selection strategy of the algorithm itself. All algorithms achieve the expected goal and can meet the needs of high-reliabile and real-time communication for wireless network in the field of industrial measurement and control.

Related Dissertations

  1. Research on the End-to-End One-Way-Delay Measurement Technology of Communication Network,TN915.06
  2. Research on Time Synchronization Algorithm in Wireless Sensor Networks,TN929.5
  3. Research on Synchronizationalgorithm of WiMAX Physical Layer Based on IEEE802.16e,TN929.531
  4. NCUC-Bus fieldbus technology research and implementation,TP273.5
  5. Research on Time Synchronization of High Latency Networks,TN915.01
  6. GPS synchronization frequency correction in 3D electromagnetic acquisition system application,P631.325
  7. Design of the New Above Ground Marker System of the Pipeline Internal Inspection Instrument Based on Magnetic-Flux Leakage Theory,TH878.3
  8. Unidirectional Link Detection and Link Quality Estimation Algorithms in Wireless Sensor Networks,TP212.9
  9. The Research and Application of Link Self-recovery Techniques in TDMA Communication System,TN929.532
  10. Reliable Routing in Wireless Mesh Network Technology,TN929.5
  11. Wireless sensor networks based on reliable data fusion Routing,TP212.9
  12. Research on SOA-based Runtime Framework of DEVS Simulation and Its Key Technologies,TP391.9
  13. Range when the system design,TP274
  14. Transmit power adjustment based on wireless sensor network topology control,TP212.9
  15. The Study of Synchronous Acquisition and System of Wireless Sensor Networks for Structural Health Monitoring,TN929.5;TP274.2
  16. Satellite timing and frequency calibration System,V423.4
  17. For remote meter reading technology for wireless sensor networks,TP212.9
  18. Study on Real-time Communication and Precise Time Synchronization of Cnc Fieldbus,TP273.5
  19. Remote optical signal interval of precision measurement technology,TP274
  20. Signal Processing and Synchronization of the Coast-ship Multi-station Radar,TN958

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation components,parts > Transmitter ( converter),the sensor > Sensor applications
© 2012 www.DissertationTopic.Net  Mobile