Dissertation > Excellent graduate degree dissertation topics show
Guided Radar and Wide Band RFIC Tranceiver Design
Author: TaoYong
Tutor: RanLiXin
School: Zhejiang University
Course: Physical Electronics
Keywords: Leaked cable Transceiver Noise figure Linearity Image rejection
CLC: TN402
Type: Master's thesis
Year: 2010
Downloads: 112
Quote: 0
Read: Download Dissertation
Abstract
|
The leaked cable Guided Wave Radar is a leaked cable buried in the ground radar as a sensor , originated in the 1970s . In recent years, as radar signal processing technology , especially the development of ultra - wideband technology leakage cable Guided Wave Radar growing application in the field of security . Compared to other types of perimeter intrusion detection systems, leaky cable guided wave radar has good concealment , false alarm rate, without blind spots, the advantages of positioning accuracy , and thus become the hot spot of the current development of perimeter intrusion detection systems . The paper introduces the research background and research status of the leaked cable Guided Wave Radar technology introduced , then the relevant principles of the leak cable guided wave radar system , given the system implementation of a zero- IF architecture . Then introduced in relation to the system 's hardware and software design , hardware design , including analog transceiver front-end and digital baseband part of the circuit design , software design is mainly internal FPGA signal modulation and demodulation . The paper designs and implements a carrier frequency of 40MHz leaked cable guided wave radar system . Next-generation radio access network , the leaked cable has a great prospect for its great bandwidth . Remote antenna , wireless location and spatial selection are leaked cable transmission potential areas . Based on SMIC 0.18um CMOS process , the paper designed a broadband RF transceiver chip , can be applied to leak cable to build a wireless network . Meanwhile , the chip can also be used in the field of wireless sensing , such as non-contact life detection , microwave ranging .
|
Related Dissertations
- High Speed Frequency Measurment and Non-Linearity Correction of Frequency Modulated Capacitive Displacement Sensor,TH822
- Development of a Flexible Position-Sensing Detector for Touch Control,TP334.3
- CTCS wireless programmer study,U284.48
- Ka-band LTCC component key technology research,O441.4
- Based on LTCC technology of microwave and millimeter wave filter with L-band transceiver front - end,TN713
- UWB transceiver front-end design,TN925
- C-band satellite communications transceiver module developed outdoor unit,TN927.3
- W-band transceiver module technology research,TN859
- OC-48 Multi-Service Optical Transport System Research,TN929.1
- A positioning tracking system receiver RF front-end design and implementation,TN851
- Research of Vehicle Navigation System Based on Real-time Transportation Information,U463.6
- Design of Data Acquisition System in Temperature and Wireless Transmission Based on nRF905,TP274.2
- RF / Microwave Amplifier Research and Implementation,TN722
- Design and Realization on the Radio Frequency Chain of Broadband Transceiver,TN859
- The Research and Impementation in Logic and Control System of High-Performance Wireless Communication Transceiver,TN859
- The Design of CMOS Low Noise Amplifier,TN722.3
- Capacitive touch screen of,TP334.3
- Oil-water two-phase flow horizontal phase holdups and design optimization of capacitive sensors,TP212
- Road disaster dynamic monitoring and warning system design and implementation of video transmission,TP274.4
- 1553 Bus Transceiver Design,TN432
- The Study of Miniaturized S-band Image-rejected Mixer,TN773
CLC: > Industrial Technology > Radio electronics, telecommunications technology > Microelectronics, integrated circuit (IC) > General issues > Design
© 2012 www.DissertationTopic.Net Mobile
|