Dissertation > Excellent graduate degree dissertation topics show

Study on Pulse Train Controlled Switching Converter

Author: MouQingBo
Tutor: XuJianPing
School: Southwest Jiaotong University
Course: Proceedings of the
Keywords: Pulse Width Modulation (PWM) Pulse Train (PT) Control Discontinuous Conduction Mode (DCM) Pulse Skip Modulated (PSM) Pseudo Continuous Conduction Mode (PCCM)
CLC: TM46
Type: Master's thesis
Year: 2010
Downloads: 139
Quote: 5
Read: Download Dissertation

Abstract


With higher and higher requirement on the performances of switching power supply, linear control techniques of switching converters based on traditional Pulse Width Modulation (PWM) are seriously challenged by transient characteristics and robustness resuirement. In order to enhance the performance of switching power supply, it is necessary to introduce nonlinear control with better control performance.A new nonlinear control technique, pulse train (PT) control technique of switching dc-dc converters in discontinuous conduction mode (DCM) is described in the thesis. The operation principle and characteristics of voltage mode and current mode PT control are analyzed in detail. The energy model, control pulse combination and output voltage ripple of PT controlled DCM switching dc-dc converters are also analyzed in detail. Simulation and experimental results are presented to verify the theoretical analysis results.A novel control method Pulse Skip Modulated Pulse Train (PSM PT) control is presented in this thesis. PSM PT with Voltage ripple control (VRC) and load current control (LCC) are analyzed. The efficiency at light load can be improved with PSM PT control. The analysis results are verified through simulation and experimental results.PT control technique is applied to the control of Pseudo Continuous Conduction Mode (PCCM) swithing converter, which increases the load capacity of the converter. The control method is analysised in detail and the control circuits are designed. Simulation and experimental results are performed to verify the theoretical analysis results.

Related Dissertations

  1. The development and the development of new magnetic electrical detonator initiation,TD235.22
  2. Spray Image Processing and Atomization Characteristic Study of Variable-Rate Spray Based on Pulse-Width Modulation (PWM),S491
  3. Design and Implementation of Semiconductor Laser Driver Based on ATMEGA88,TN248.4
  4. The Study on PMSM AC Servo Development Platform,TM341
  5. Design of Stablized Platform Based on DSP and Fuzzy PID,TP273
  6. Study on Power Supply of Electrostatic Precipitator Used in Coal-Fired Power,TM621.7
  7. The Design of Vertical Axis Wind Turbine Voltage Controller,TM315
  8. An optimized single inductor dual-output buck-boost DC - DC converters light load performance design strategies,TM46
  9. Research on SMA Actuator Applied to Biomimetic Propel,TB17
  10. Research on the Parabolic PWM for Direct Current Control in Voltage Source Converters,TM46
  11. The Top-Down Design of a Monolithic Current Mode Buck Converter with Synchronous Rectification,TM46
  12. Development of the Switching Power Charger,TM910.6
  13. Study of Full Digital Induction Motor Speed-Sensorless Vector Control VVVF System,TM346
  14. Research and Design of a Boost PWM Switch-Mode Power Supply Control Chip,TN86
  15. The Computerized Control of WY1.5 Hydraulic Excavator,TU621
  16. A Study of Wave-control CO2 Welding Inverter’s Control System Based on Digital Signal Processor,TG434.1
  17. FED dedicated power supply and diode -type FED digital display drive circuit design and production,TN86
  18. DC linear motor for EDM machine DSP control technology research,TG661
  19. DWDM Accurate Wavelength Transmitter Applied in EPON,TN929.1
  20. Research on Electronic Power Transformer,TM411

CLC: > Industrial Technology > Electrotechnical > Transformers, converters and reactors > Converter
© 2012 www.DissertationTopic.Net  Mobile