Dissertation > Excellent graduate degree dissertation topics show

Study on Layered Double Hydroxides as Drug Delivery System and the Release Property of Drug from Nanohybrids

Author: LiZuo
Tutor: HouWanGuo
School: Shandong University
Course: Physical and chemical
Keywords: Layered double hydroxides Camptothecin Nanohybrids Controlled release Surface functionalization
CLC: TB383.1
Type: Master's thesis
Year: 2008
Downloads: 213
Quote: 2
Read: Download Dissertation

Abstract


Nowadays one of the important research content in the research field of drug delivery system is research and development of the drug delivery materials.The perfect drug carrier should have advantages in the aspects of its bioavailability,biodegradability, biostability,reduced toxicity and the high drug loading.Recently,layered double hydroxides（LDHs）have been reported as a new delivery system for many anionic drugs via ion-exchange and some poorly water-soluble drug molecules via methods of coprecipitation,assemblage and reconstruction.Therefore in order for poorly water-soluble drug therapy to be more effective,the research on the property of LDHs as drug delivery material is very important.Among those poorly water-soluble drugs,camptothecin（CPT）is a typical antitumor model.We chose CPT as the guest molecule and Mg-Al LDHs as the host material to synthesize CPT-LDHs nanocompounds via methods of assemblage and reconstruction. The effect of reaction conditions on the drug loading were examined.Powder X-ray diffraction（PXRD）,TEM,SEM and FT-IR spectroscopy were used to characterize the achieved products.Release mechanism and kinetics of CPT from nanohybrids were investigated as well.Main contents and conclusions:1.Synthesis and characterisation of Mg-Al LDHsThe purpose of this part is to synthesize the pristine material LDHs.The pristine Mg-Al LDHs was prepared by coprecipitation method from mixed solution of Magnesium and Aluminum chloride hexahydrates,The effects of the molar ratio of MgCl26H2O/AlCl36H2O on M3+/[M2++ M3+]molar ratio x and the lattice parameter were investigated.The results show that Mg/Al molar ratio of the syntheized product was lower than that of the raw mixed salt solution,the reason for which was that the solubility product of Mg（OH）2 is lower than that of Al（OH）3. x is between 0.19～0.36,a is between 0.304～0.308nm,c is between 2.306～2.4nm,d is between 0.767～0.799nm,the interlayer space is about 0.30nm.The achieved product consisted of the typical thin,hexagonal plate-like crystals with～100 nm in size.2.Synthesis and charaterisation of CPT-LDHs-SDS nanohybrids（1）The method of assemblage was used to syntesize the nanohybrids.During the process the Mg/Al ratio x of MgxAl/DS LDHs,the polarity of the solvents,initial CPT concentration(CCPT)and contact time in the intercalation process were studied to investigate their effects on the amount of CPT loaded into CPT-MgxAl LDHs-SDS nanohybrids(Ain).The most effective uptake of CPT occurred in DMSO media by Mg3Al LDHs-SDS.The maximum Ainvalue reached about 5.2%（w/w）under studied conditions.（2）The release rate of CPT from the nanohybrid at pH 7.2 is remarkably lower than that at pH 4.8,this is due to a possible difference in the release mechanism.For the pH 7.2 release,the mechanism is primarily through diffusion of drug molecules;while for the pH 4.8 release,that is through both the dissolution of LDH layers and diffusion of drug molecules among which the former one is dominating.The release kinetics of CPT from the nanohybrids obeyed the pseudo-first order kinetic model.3.Synthesis and charaterisation of CPT-LDHs nanohybrids（1）The method of reconstruction was used to syntesize the nanohybrids in ethanol-water mixed solution.During the process the volume ratio（Rv）of ethanol/water, initial CPT concentration(CCPT),the reaction temperature and contact time in the intercalation process were studied to investigate their effects on the amount of CPT loaded into CPT-LDHs nanohybrids(Ain).The maximum Ainvalue reached about 14% （w/w）when Rv=7:3 after 24h reconstruction under 60℃.（2）According to the size of CPT molecule and the gallery height of the nanohybrid,a probably arrangement of CPT molecules in CPT-LDHs nanohybrid may be proposed, i.e.,CPT molecules arrange as monolayer with their long axes parallel to the LDHs layers.（3）The release rate of CPT from the nanohybrid at pH 7.2 is remarkably lower than that at pH 4.8,this is due to a possible difference in the release mechanism.For the pH 7.2 release,the mechanism is primarily through diffusion of drug molecules;while for the pH 4.8 release,that is through both the dissolution of LDH layers and diffusion of drug molecules among which the former one is dominating.The release kinetics of CPT from the nanohybrids obeyed the pseudo-second order kinetic model.（4）we successfully attached disuccinimidyl carbonate（DSC）to the LDHs surface and achieved the surface functionalization of LDHs.

Related Dissertations

  1. Adsorption Effects of Phosphate and Chromium from Aqueous Solution by Adsorption Using LDH and Mg/Fe/Al Modified Montmorillonites,X703
  2. Quinoline ring substituted camptothecin QSAR Studies,R914
  3. Study on the Application of Modified Ldhs in the Synthesis of Acetysalicylic Acid,TQ463
  4. Assembly and Properties Study of Layered Double Hydroxides with UV-shielding Ability,TB34
  5. Preparation and Performances of Polypropylene/LDHs Composites,TB332
  6. Study on the Preparation and Properties of Modified Layered Double Hydroxides/Chitosan Blend Film,TB383.2
  7. Preparation of Surface-functionalized Graphene and Its Influence on the Mechanical Properties of Nanocomposite Materials,TB332
  8. Self-assembly Behavior of Tussah Silk Fibroin and Application in Drug Controlled Release,R318.08
  9. Structures and Properties of Functional Layered Double Hydroxide/Polymer Nanocomposites,TB383.1
  10. Construction of Transition Metal Oxide Nanomaterials and Their Property and Application Research,TB383.1
  11. Synthesis, Controllede Release Properties and Antifungal Activities of Novel Cis- and Trans-Racemate Complexes of Propiconazole,O641.4
  12. Study on Synthesis, Crystal Structure and Bioactivity of Azaconazole Metal Complexes,O641.4
  13. Immobilized Horseradish Peroxidase Modified Electrode and Its enzymatic biofuel cell in the application,TM911.4
  14. MWCNTs radiation shear and controlled release of research on polyphenols,TB383.1
  15. Effects of Controlled Release N-Fertilizer on Plant Tissue and Soil N Concentration and Yield of Cotton,S562
  16. Simple and glutamic acid anions intercalated LDHs functional materials theoretical simulation study,O621.13
  17. Fast Measurement for Nutrient Release Rate of Slow/Controlled Release Fertilizers and Correlation with Nutrient Release Rate in Field Soils,S145.6
  18. Rice Slow / Controlled Release Fertilizer Research and Application Technology,S511
  19. Effect of Controlled Release Fertilizer on the Yield and Nutrient Accumulation in the Wheat-maize Rotation System,S513
  20. Studies and Use of Curing the Cow Endometritis with New Suppository,S858.23
  21. Preparation of Cobalt/Nickel Hydroxide and Co3O4 and Their Electrochemical Capacitive Properties,O614.812

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Special structural materials
© 2012 www.DissertationTopic.Net  Mobile