Dissertation > Excellent graduate degree dissertation topics show

Study on the Three-dimensional Measurement of Bubble Characteristic Parameters in Gas-Liquid Two Phase Flow

Author: MengXinDong
Tutor: ZhangTao
School: Tianjin University
Course: Detection Technology and Automation
Keywords: gas-liquid two phase flow bubble characteristics three-dimensional measurement virtual stereo vision sensor digital image processing
CLC: O359.1
Type: Master's thesis
Year: 2010
Downloads: 113
Quote: 1
Read: Download Dissertation

Abstract


With the developments of science and technology, gas-liquid two-phase flow has been widely used in many fields such as: electrical, chemical, nuclear, petroleum, metallurgy and environmental areas etc. The performances of its applications depend largely on the bubble movement patterns and the interactions between discrete phase and continuous phase. In order to investigate the principle of gas-liquid two-phase flow and describe the movement characteristics of the dispersed phase accurately and thus guiding the manufacture as well as practical applications, achieving bubble’s 3D characteristics and velocity field are of great significance.After reviewing the development of the measurement of gas-liquid two-phase flow parameters, digital image processing technique, and the application of high-speed photography in parameter detection of two-phase flow, this paper investigated and analyzed three-dimensional measurement of the sparse bubble characteristics.Two-dimensional characteristic parameters of sparse bubble are extracted based on the digital image processing technique. The improved Otsu method with dynamic threshold compression is presented for image binarization after image pre-processing. Scan line seed filling algorithm and morphological image processing are combined to implement holes filling, and the automatic identification of bubble regions is achieved based on the edge-area features and then the disturbance is filtered out. Finally, the shape feature parameters of bubble such as perimeter, area, circularity, mass center coordinate can be extracted effectively, and the bubble motion velocity is also achieved.The basic principles of three-dimensional measurement for bubble characteristic parameters in gas-liquid two-phase flow are investigated in this thesis. After the analysis of different camera calibration methods, main work is done on the Tsai two steps calibration algorithm and providing the main steps.Virtual stereo vision sensor was designed in this thesis. After the analysis of measuring principle and the establishment of mathematical models, three aspects-such as the size of actual field of view, the sensor structure and the error-were taken into account to determine the structural parameters of the sensor and the simulation results were also provided. Then, the general principles and steps are summarized and this thesis also finished designing the base platform according to the size of the actual field of view. Therefore, a complete set of virtual stereo vision imaging system was accomplished and tested in the experimental device. The results show the distance error is better than 2.67mm and the relative error is better than 6%.The three dimen- -sional reconstruction of bubble motion is primarily realized.

Related Dissertations

  1. Research on Basic Algorithms of Digital Image Processing and Implementation with FPGA,TP391.41
  2. Research on Visual Servo System of Mechanical ARM,TP242.6
  3. Application Research of Digital Image Processing on Container Inspection,TP274.4
  4. Flow Behavior Description of Two-Phase Flow Based on Image Processing Techniques,TP391.41
  5. System Designing to Analysis the Real-time Density of Group-control Elevator Passengers Flow,TP391.41
  6. The Gray Image Processes Techology of Sediment Core and Its Application on the High Resolution Sediment Record in Inner Shelf of the East China Sea,P736.21
  7. Real-time Three-dimensional Profile Measurement and Software Developing,TP274
  8. Study of the Evaluation on the Homogeneity of Dielectric Barrier Discharges Basing on Digital Image Processing Technology,TP391.41
  9. Research on Pavement Crack Detection Algorithom Based on Digital Image Processing,TP391.41
  10. The image -based face recognition system design and implementation beautification,TP391.41
  11. Raster-based three-dimensional projection of dental measurement system,TP391.41
  12. High-speed imaging system based on small pipe gas-liquid flow parameter measurement method,O359.1
  13. Space motion panoramic three-dimensional measurement of small target,TP391.41
  14. Cleaning phase flow method using complexation - ultrafiltration membrane module of pollution,X703
  15. Low temperature detection of arcing contacts,TM572
  16. Image intensifier and a screen resolution of defect detection technology,TN144
  17. Based mixture compaction properties of asphalt pavement compaction,U416.217
  18. Border infrared monitoring system design moving target detection warning,TP391.41
  19. Magnetic particle inspection defect recognition automation system design and development,TP391.41
  20. OpenCV-based digital image stabilization system to achieve,TP391.41
  21. Visual inspection based on embedded system design and implementation,TP391.41

CLC: > Mathematical sciences and chemical > Mechanics > Fluid Mechanics > Multiphase flow > Liquid, gas (vapor) two-phase flow
© 2012 www.DissertationTopic.Net  Mobile